My Tahoe REBUILD...New RF amps 21,000+ watts RMS (PICS) 2nd RF 3sixty.2 in!

[Ernesto]

Ahh alright thanks...

I'll mount one and see how well it goes on...If it seems like it's not gonna go no where then it will stay...If I feel like it might fall over time then I'll have to stick some MDF inside the seat some how.

[AP Zoutes]

How many ft3 after displacement is this box?

[tom707]

hey steve, did you use a 500amp fuse for all the amps or just for the t40001bd amps? because i was goin to order 5 of the t40001bd amp for the summer ans i seen that rockford has new 500amp anl fuses

[tom707]

hey steve, is all your Odyssey PC 2150 Batterys ground hooked up to your buss bar. and what would be the best metal to use to make a buss bar?

[LSN2meBoom916]

TECHNICALLY....Gold/Silver/platinum/Nickle are the BEST you can use but if you got that kinda $$$ I can think of better ways to spend it.

Copper is fine (and nice and cheap compared to ^^^), but it finger prints pretty easily so if you can rubber coat everything but the contact points I would, or keep air from touching them via some other cover material that would seal it off nicely except at the contact points.

Brass is pretty non corrosive too but will still get prints.

~2cents

(I know I'm not Steve, but I thought I'd toss that out there cuz I know the man is a busy MO-FO and might take a lil while to get to ALL his "hey steves")

I'll leave the other Q for someone who knows already or Steve himself cuz I'm sure it's in the build logs/sounddomain/etc somewhere but i'm feelin lazy, as most generally are(use the search feature).

Edited March 18, 2007 by LSN2meBoom916

[meade916]

How many ft3 after displacement is this box?

i think its 18 cubes after displacement.....not positive, i need to look at some of my old plans and find out. I build so many boxes that sometimes i forget what is what. I built this one a while back so sometimes i forget the actual numbers.

[meade916]

hey steve, did you use a 500amp fuse for all the amps or just for the t40001bd amps? because i was goin to order 5 of the t40001bd amp for the summer ans i seen that rockford has new 500amp anl fuses

the amps come with an internal 500amp fuse.

there is also a 300 amp fuse at each battery.

[Cdizzle]

can you use this same idea for REM wires?

[sean 371]

Yes you can, but the current coming off of the remote wire from your head unit is very low. So just pick up a standard 12v relay if you plan on running remote wires to a lot of amps. But, you might as well daisy chain the remote wires. There's no real point to a buss bar for them.

[ChevyBoy]

no you cant do that because you will pull too much through your remote wire and fry it in the head unit itself.