My Tahoe REBUILD...New RF amps 21,000+ watts RMS (PICS) 2nd RF 3sixty.2 in!

[meade916]

actually it was mainly designed to be 52hz wide open and 30hz with the port in it...the idea didnt pan out as good as i thought it would. With the port out the numbers were about the same but with no low end. I think the subs may be too close to hole when its wide open like that. Also im not so sure a Tahoe likes to be tuned that high. It was just for burping like that but since it didnt help i decided not to try it again. I can change the port tuning a little still by having different ports to just bolt in but i havent done it yet. I may do it this summer, maybe experiment a little if i can find some time.

[ChevyBoy]

thats what i was wondering, how you would get the higher tuning. i knew the port in there wasnt really all that long, so i was unsure how "short" you could go. im sure if it broke a 60, it would be all over this thread lol.

[sean 371]

He'd just have to add more port area to it.

[ChevyBoy]

whatre you talking about?

[sean 371]

Instead of making the port shorter, he can make the port area larger to raise the tuning.

[meade916]

Instead of making the port shorter, he can make the port area larger to raise the tuning.

trust me there is a ton of area with the port unbolted and removed...that is why the tuning goes way up.

[ChevyBoy]

Instead of making the port shorter, he can make the port area larger to raise the tuning.

that also means cutting into the box.

[Slinky]

judging by the pics you would have plenty of port area with the port removed. x2 on experimenting this summer. i want to see you break 60.

[NotoriouslyLoud]

i think we would all love to see steve break a 160

[meade916]

id love to see me do it too but i would have to say it probably wont happen. Going from 157-158 to a 160 is like going from 140 to a 150. Seems like it anyway. At this level those deebeez are so hard to come by.