Help With System

[chewie]

If its deep cycle then yes you could. But if you wanna play you gotta pay

[takenotes101]

300A is too big. The amp itself only draws 200. So I'd say 225.

is 250 still too much?

[jonathancullen89]

knu has cheaper wire then that. look on thier website they also have inline fuses and everything you would need. all of it is decently priced also

[chewie]

But that cheaper knu wire is copper clad aluminum which is crap

The coppercableman stuff is pure copper

Just get a 200 amp breaker from rockford fosgate

[takenotes101]

so 2 200 fuses between batts, then another 200 fuse between amp and batt right?

[chewie]

so 2 200 fuses between batts, then another 200 fuse between amp and batt right?

yup you should run a positive wire to the front batt from the alt and you should fuse that

and upgrade the batt to chassis ground and the motor to chassis ground

[soundzright]

Sounds like you have everything figured out

Id go with the wire on ebay from coppercableman

For the price of one kenetick you could buy two bluetop optimas for the rear and a redtop for the front

I would like to know where you can get a new optima red top for 100 much less the blues for 100 each. 3x100

Edited February 11, 2009 by soundzright

[chewie]

How much does a kenetik 2400 cost? Around 375

I can get redtops for 120 and bluetops for around 150

i meant the price he spends on one kenetik he could get two bluetops

(lack of punctuation)

[dmanson]

although the AQ2200 has a 200 amp fuse .......... do you plan on having an amp for your highs and mids? if so then you might want to do a 250 or 300 amp fuse depending on the size of the high/mid amp.

Edited February 11, 2009 by dmanson

[takenotes101]

i would want to eventually, but not now... maybe around summer