ZombieswithMustaches Posted February 17, 2009 Author Report Share Posted February 17, 2009 how much are you wanting to spend? Tops about $3-400. I might be able to squeeze a little more, if need be. Quote Float mounted IPad Mini playing through Bluetooth IStreamer for Iphone or Ipad Rockford Fosgate 3Sixty.3 RE Audio XXX 6.5's in each door with a second set soon to be added to the front doors Two Rockford T600-4's for the components Blowthrough with two Sundown SA-8's RF T1500-bd's for the subs 8000k H.I.D.'s in headlights and fogs Lifted 2" in front and 2" in back (soon to be installed a Suspension Maxx 1.5" body lift) 17" Ultra Rogue 175's on Nitto Trail Grappler 285/17 70's Undercover Bedcover Surco Roof Rack Five Hella Lights on front bumper 270A Mechman Alternator Two Optima Yellow Top batteries Dynamat double layered each door and roof, quadruple layered on back wall, single layered on floor with Second Skin Luxury Liner Pro on top. Link to comment Share on other sites More sharing options...
Sinosic Posted February 17, 2009 Report Share Posted February 17, 2009 Quote [email protected] Link to comment Share on other sites More sharing options...
AI James Posted February 17, 2009 Report Share Posted February 17, 2009 for a 15 on that wattage, havoc since its sealed thats the only reason i didnt refer you to a lvl 4 DC sub Quote Link to comment Share on other sites More sharing options...
ZombieswithMustaches Posted February 17, 2009 Author Report Share Posted February 17, 2009 man, that's badass! You think I could fit 2??? :hairtrick: Quote Float mounted IPad Mini playing through Bluetooth IStreamer for Iphone or Ipad Rockford Fosgate 3Sixty.3 RE Audio XXX 6.5's in each door with a second set soon to be added to the front doors Two Rockford T600-4's for the components Blowthrough with two Sundown SA-8's RF T1500-bd's for the subs 8000k H.I.D.'s in headlights and fogs Lifted 2" in front and 2" in back (soon to be installed a Suspension Maxx 1.5" body lift) 17" Ultra Rogue 175's on Nitto Trail Grappler 285/17 70's Undercover Bedcover Surco Roof Rack Five Hella Lights on front bumper 270A Mechman Alternator Two Optima Yellow Top batteries Dynamat double layered each door and roof, quadruple layered on back wall, single layered on floor with Second Skin Luxury Liner Pro on top. Link to comment Share on other sites More sharing options...
ZombieswithMustaches Posted February 17, 2009 Author Report Share Posted February 17, 2009 okay, could I get a ported box to do some decent sq?? I've also thought about 3 x 8's. Welcome to my dilemna guys!! I'm stuck. I just want it loud and clear. Quote Float mounted IPad Mini playing through Bluetooth IStreamer for Iphone or Ipad Rockford Fosgate 3Sixty.3 RE Audio XXX 6.5's in each door with a second set soon to be added to the front doors Two Rockford T600-4's for the components Blowthrough with two Sundown SA-8's RF T1500-bd's for the subs 8000k H.I.D.'s in headlights and fogs Lifted 2" in front and 2" in back (soon to be installed a Suspension Maxx 1.5" body lift) 17" Ultra Rogue 175's on Nitto Trail Grappler 285/17 70's Undercover Bedcover Surco Roof Rack Five Hella Lights on front bumper 270A Mechman Alternator Two Optima Yellow Top batteries Dynamat double layered each door and roof, quadruple layered on back wall, single layered on floor with Second Skin Luxury Liner Pro on top. Link to comment Share on other sites More sharing options...
hotshot27 Posted February 17, 2009 Report Share Posted February 17, 2009 not to try and bust anyones bubble, but do you really expect to get 900 watts rms out of that sony amp? the last time I tested that amp, I had a 14 volt power supply with plenty of current, but the amp would only draw like 40 amps of current, and even then it was putting out a very clipped signal. Quote Current Setup: Factory HU with LOC mids/highs-Insignia components Sub- E8 in bass tube Amp- sae-1200d Show Setup: HU-Sony MEX-1HD (brings massive respect for sony) fronts - Infinity Kappa perfect comps rears- Infinity Kappa coax mid/high amp - Autotek 5600 Subs - 2 RE SE 15's Sub Amps - 2xSAE-1200D Box - 5cubes sealed Wire- Lots of Knu 1/0 SECOND SKIN Link to comment Share on other sites More sharing options...
ZombieswithMustaches Posted February 17, 2009 Author Report Share Posted February 17, 2009 not to try and bust anyones bubble, but do you really expect to get 900 watts rms out of that sony amp? the last time I tested that amp, I had a 14 volt power supply with plenty of current, but the amp would only draw like 40 amps of current, and even then it was putting out a very clipped signal. I know the Sony amp isn't the greatest. I am going to upgrade that very soon. Gimme time hotshot Quote Float mounted IPad Mini playing through Bluetooth IStreamer for Iphone or Ipad Rockford Fosgate 3Sixty.3 RE Audio XXX 6.5's in each door with a second set soon to be added to the front doors Two Rockford T600-4's for the components Blowthrough with two Sundown SA-8's RF T1500-bd's for the subs 8000k H.I.D.'s in headlights and fogs Lifted 2" in front and 2" in back (soon to be installed a Suspension Maxx 1.5" body lift) 17" Ultra Rogue 175's on Nitto Trail Grappler 285/17 70's Undercover Bedcover Surco Roof Rack Five Hella Lights on front bumper 270A Mechman Alternator Two Optima Yellow Top batteries Dynamat double layered each door and roof, quadruple layered on back wall, single layered on floor with Second Skin Luxury Liner Pro on top. Link to comment Share on other sites More sharing options...
AI James Posted February 17, 2009 Report Share Posted February 17, 2009 yes you can get good quality sound out of a ported enclosure...just pick the right driver. ported id say havoc still, can try the trash, again i love the level 4 but my havoc sounded better in my installs Quote Link to comment Share on other sites More sharing options...
sri3850341 Posted February 17, 2009 Report Share Posted February 17, 2009 you should have everything mapped out for what you want as apposed to building a sub system around an amp...sell the sony to some guy starting out,on craigslist then save and research what you need to fit your goals,if not youll end up spending more money than needed,allthough sometimes thats the fun of it Quote 07 mote carlo.. deh-p800prs hu-cdt gold 6.5's-cdt 6x9 2 ways-mcintosh mc431m(mids/highs) bxi2608,2 10w7's in 4rth order(designed by pete k)ported into cabin via armrest cutout dc power 260 amp alt-missing link module (15.4v)kicker 1/0 kit deka intimidator under hood metered 141.0 @ 32hz windows down @ kick,termlab Link to comment Share on other sites More sharing options...
///Alpine91 Posted February 17, 2009 Report Share Posted February 17, 2009 I have a DC lvl4 15" in a ported. I get my amp thursday and i'll let you know how it sounds sq wise. Quote 1 DC lvl 4 15" 1 Hifonics BXi 1608D 3.2ft^3 Box tuned to 32-33Hz Knu Kolossus Fleks Kable 1/0 Knu Karma SS 8 Gauge Speaker Wire Kenwood eXcelon KDC-X493 Head Unit (coming soon) Kenwood mids + highs (coming soon) Build Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.