RamenNoodles Posted February 27, 2009 Report Posted February 27, 2009 Nice little tutorial for those having the same problem. Good job mang. Quote Diablo Audio Technologies Fi Car Audio Ascendant Audio
Zade08 Posted February 27, 2009 Author Report Posted February 27, 2009 Nice little tutorial for those having the same problem.Good job mang. Thanks man. Id love to learn to work on these things myself. Got a lot to learn though. Quote Vehicle: 2001 Ford Escape Head Unit: Kenwood Kdc-x592 All out for a rebuild. New shit coming in the next 30 days.
E a r t h Posted February 27, 2009 Report Posted February 27, 2009 the bottom plate is somewhat flexable, so i can see this happening depending on where and how you mount the amps, and the material under it. could be a mounting point thats an uneven surface, or thick material pushing up on the bottom plate while mounted Quote
audiofanaticz Posted February 27, 2009 Report Posted February 27, 2009 decent fix, altho I think your problem will reoccur pretty soon. Electrical tape aint nothing to thick and if you had problems with rubbing before, its still going to be there and just rub thru the tape. My spl amps have some sort of thicker heat resistant pad it looks like that is really stiff and some what thick. Or use something more absorbant such as sound deadening material (perferbly something without a metal backing like black hush mat). Quote
Zade08 Posted February 27, 2009 Author Report Posted February 27, 2009 Ya I still need to go to the hardware store and get a different material. Te electrical tape was just a quick fix. Ima look around a bit and update wit what I find and how it works out. Quote Vehicle: 2001 Ford Escape Head Unit: Kenwood Kdc-x592 All out for a rebuild. New shit coming in the next 30 days.
Dr. Johnson Posted February 27, 2009 Report Posted February 27, 2009 Why wouldnt you un hook all of the wires like remote, power and ground at least before opening up an amplifier? Quote
Zade08 Posted February 27, 2009 Author Report Posted February 27, 2009 Why wouldnt you un hook all of the wires like remote, power and ground at least before opening up an amplifier? I undid my fuse at the front bat as its easier than disconnecting all the wires. Quote Vehicle: 2001 Ford Escape Head Unit: Kenwood Kdc-x592 All out for a rebuild. New shit coming in the next 30 days.
Scrubbalo Posted March 2, 2009 Report Posted March 2, 2009 Get you some rubber tube patces and glue them to the cover. Quote Sundown SAZ-3000 2 12" T3 DVC1ohm subs 58hz peak cabin frequency no deadner yet box tuned to 38hz BIG 3 upgrade yamaha patio speakers rear fill Alpine 9833 deck PPI FRX-456 Crossover PPI PAR-245 Preamp/EQ PPI DEQ-30 Band EQ fronts PPI tweets in kick panel PPI 2-way's in kicks for now 0/GA 1 run front to back Memphis 4 channel running rear speakers 75 X 4 only 2 channels used for now Planet Audio 4 channel 75 X 4 running front speakers 146.7 db usaci drivers door open 163.3 db port challenge mic in port 2012 4door silverado
Noobtastic14 Posted July 25, 2009 Report Posted July 25, 2009 Just like to bump and say Thanks to Zade08 for saving me a lot of frustration -Drew Quote I am a United States Military Arts and Crafts Professional. Sand it off, Paint it on. uhoh_45 said: dont be a pussy P give the jeep to drew
testtones Posted July 25, 2009 Report Posted July 25, 2009 Why not just replace the bottom plate with plexi or lexan? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.