Crump Posted March 18, 2009 Report Share Posted March 18, 2009 I am tired of drilling a 3/8 inch hole into my 0 guage ring terminals. I tried a long side adapter from stinger, it said 3/8" diameter, but it didnt screw in, anyone else have this problem? What did you do? Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
JPagan Posted March 18, 2009 Report Share Posted March 18, 2009 try some different terminals, the Knu konceptz terminals seem to have a large whole drilled in them. Link to comment Share on other sites More sharing options...
Crump Posted March 18, 2009 Author Report Share Posted March 18, 2009 try some different terminals, the Knu konceptz terminals seem to have a large whole drilled in them. they didnt fit over and where you put the wire in is smaller than the stinger. I am not a fan of Knu Conceptz, wiring accesories. Stinger FTW, i know that kinetik sells these terminals, but i dont feel like spending 20 bucks + shipping. Info on the Fosgate Posts they sell at best buy? I know these would work, but i want to try local. http://www.sonicelectronix.com/item_8425_K...+-KHC-TP-.html# Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
soundzright Posted March 18, 2009 Report Share Posted March 18, 2009 they didnt fit over and where you put the wire in is smaller than the stinger. I am not a fan of Knu Conceptz, wiring accesories. Stinger FTW, i know that kinetik sells these terminals, but i dont feel like spending 20 bucks + shipping. Info on the Fosgate Posts they sell at best buy?I know these would work, but i want to try local. http://www.sonicelectronix.com/item_8425_K...+-KHC-TP-.html# http://www.sonicelectronix.com/item_8425_K...P+-KHC-TP-.html something like this work? Link to comment Share on other sites More sharing options...
Mr. Darkjustice Posted March 19, 2009 Report Share Posted March 19, 2009 for my kinetik i had the same problem, so i ended up usin http://www.autozone.com/autozone/catalog/a...equestid=118269 Fusion With A Stetsom 4k2d on 2 DC XL 15s tuned to 31hz and Subs and ports forward The Revolution Was Not Televised But There Is This Thread(clicky) Dr Merkenstein is my 360 gamertag and my profession. When shit gets real, call in the Doc Link to comment Share on other sites More sharing options...
Rose-Villian Posted March 23, 2009 Report Share Posted March 23, 2009 Buy 3/8th's Hole terminals lol Problem Fixed!! WWW.OSGINDUSTRIES.COM I LOVE HATER'S Link to comment Share on other sites More sharing options...
scottiej Posted March 24, 2009 Report Share Posted March 24, 2009 XS Power has tons of accessories that will work... www.xspowerbatteries.com XS POWER Batteries, Chargers & Accessories 888-4XS-POWER Link to comment Share on other sites More sharing options...
Neo_frog Posted March 24, 2009 Report Share Posted March 24, 2009 Buy 3/8th's Hole terminals lol Problem Fixed!! X10000 Ah, the 3/8" hole problem... Trust me, when I started fabbing buss bars and buying terminals I went through soooo many drill batteries and sooo much time just drilling holes that I felt was a complete waste had I bought the right stuff. Seriously, just take a look at eBay or something and buy some 3/8" terminals. http://cgi.ebay.com/Metra-Gold-Ring-Termin...DefaultDomain_0 ^^^That's what I buy EVERY time. Need an install? Hit me up.[email protected]Got car audio questions? Check here first!Everything you need to know. =]http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.