zfrerichs Posted March 21, 2009 Report Share Posted March 21, 2009 So today i decided i am going to stick with my tline in my truck for a while or until i can get some good 18s and i am going to resin and glass this box so i needed to take it out of the truck so i figured i could do a little testing i poped in a 50hz test tone and put it on repeat the voltage this with the gain half way up i would put it a little higher to get the the full wattage out of it which is around 1100-1200 watts all i can say is wow i wouldnt ever set my gain this high but it did put this out for about 3 mins or so straight and the amp did get a little warm but not hot with the gain all the way up and 0 bass boost this is around 3500 watts! wow i would ever do this but it shows that this amp is more than capable of putting out more than rated i may get flamed for this but i thought id share the results with everyone who doesnt like sundown or doesnt know about the brand Quote Roseville, CA Link to comment Share on other sites More sharing options...
IAMBUMP Posted March 21, 2009 Report Share Posted March 21, 2009 So today i decided i am going to stick with my tline in my truck for a while or until i can get some good 18s and i am going to resin and glass this box so i needed to take it out of the truck so i figured i could do a little testing i poped in a 50hz test tone and put it on repeat the voltage this with the gain half way up i would put it a little higher to get the the full wattage out of it which is around 1100-1200 watts all i can say is wow i wouldnt ever set my gain this high but it did put this out for about 3 mins or so straight and the amp did get a little warm but not hot with the gain all the way up and 0 bass boost this is around 3500 watts! wow i would ever do this but it shows that this amp is more than capable of putting out more than rated i may get flamed for this but i thought id share the results with everyone who doesnt like sundown or doesnt know about the brand gain all the way up makes it amazing? I agree the amps are bad ass, based on testimonials, but what does it show that it puts out a lot power at full gain for 3 minutes? A LOT of people run their stuff clipping the whole time they own the car. Quote If you've been doing something for 20 years, does that mean what you do it right??? __________________________________ Want: 2x Phoenix Gold RSD65CS Comp Amp Undecided AA Havoc AQ 1200 knu wiring set scew lugs for all connections Alpine IDA-X303 2v preout --this goes under the seat. Have: Alpine tape deck w/ Benzi Box and 6 disc changer Check out my Toyota build Link to comment Share on other sites More sharing options...
Colin - STAPUFT Posted March 21, 2009 Report Share Posted March 21, 2009 No o-scope though, so you don't know if it is clipping or not. ....but still.... Woah. Quote 12 - 12"s in the STAY PUFT 1989 Chevy Astro Build & Comment Log Un-Interrupted Build LogYouTube Channel Chevy Trailblazer 5.1 Dolby Digital DTS Install You have a beard of a mysterious sea captain. I would follow you to hell and back. Link to comment Share on other sites More sharing options...
smokeumtires Posted March 21, 2009 Report Share Posted March 21, 2009 I did that with my RF T3000.1 whats the formula again? Cause the numbers it was throwin out at 50hz was a LOT higher that that Quote Link to comment Share on other sites More sharing options...
zfrerichs Posted March 21, 2009 Author Report Share Posted March 21, 2009 wattage times ohm then square root that most of the time i just use the chart rms chart Quote Roseville, CA Link to comment Share on other sites More sharing options...
David Posted March 21, 2009 Report Share Posted March 21, 2009 without a true rms clamp meter ur not getting the correct info. you need to factor in amperage to get the correct true number. Quote Link to comment Share on other sites More sharing options...
banginAltima Posted March 21, 2009 Report Share Posted March 21, 2009 Amp gain is directly proportional to radio preout voltage. The higher the preout voltage the lower the amp gain setting. Quote If you build it, db's will come... NSPL World Record Holder Trunk 0-1800 watts---147.9 with 1722 clamped watts @ 40Hz(9-20-09). Competition Only Record Holder Trunk 0-500 watts---148.1 2006 Nissan Altima 3.5 SE Currently Rebuilding.... My 150db Plus Trunk Build I do box designs. [benH] 6:24 pm: clipping doesn't really hurt subs [benH] 6:24 pm: being an idiot is what blows subs Link to comment Share on other sites More sharing options...
Derrick824 Posted March 22, 2009 Report Share Posted March 22, 2009 Uhhhh, it doesn't quite work like that. I'm glad you're impressed but you will never see 3500watts out of the saz-1500d. Quote Link to comment Share on other sites More sharing options...
tibs Posted March 22, 2009 Report Share Posted March 22, 2009 Uhhhh, it doesn't quite work like that. I'm glad you're impressed but you will never see 3500watts out of the saz-1500d. so how does it work? does the speakers have to be hooked up for the ohm load? Quote Tibs 99 F-150 Build 8 twelves 8 - Re SE 12"s 2 - SunDown Audio Saz-3000d's 1 - vx4004 planet audio amp big 3 1/0 gauge MECHMAN 250 amp alt MySpace Link to comment Share on other sites More sharing options...
RamenNoodles Posted March 22, 2009 Report Share Posted March 22, 2009 so how does it work?does the speakers have to be hooked up for the ohm load? No. Quote Diablo Audio Technologies Fi Car Audio Ascendant Audio Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.