zaxfire69 Posted May 2, 2009 Report Share Posted May 2, 2009 I wired my subs to 2 ohms today. Just like on the Rockford Site. But my Dmm is reading 1.5 ohms. Is this normal or what. I gotta run 2 Sundown Saz1500d's @ 2 ohms? Will I be able to do it or will I mess the amps up? Go into protect. What will happen. I am running the Fi 15" BL Dual 2 ohm subs. Quote Link to comment Share on other sites More sharing options...
Kicker Guy Posted May 2, 2009 Report Share Posted May 2, 2009 I wired my subs to 2 ohms today. Just like on the Rockford Site. But my Dmm is reading 1.5 ohms. Is this normal or what. I gotta run 2 Sundown Saz1500d's @ 2 ohms? Will I be able to do it or will I mess the amps up? Go into protect. What will happen. I am running the Fi 15" BL Dual 2 ohm subs. No sub is truly 2 ohm they are a little off, After box rise its over 2 ohm you will be fine. Quote Head Unit: Pioneer DEH-P6000UB Sub Amp:American Bass VFL 500.1 Subs: 4 Fi BL 18's Enclosure:21.5 Cubic foot flat wall tuned to 40 hz Batteries: 3 Kinetik 2400's in the back, Kinetik 1200 under hood. Mids & Highs: 4 Kicker DS 6.5 coax in doors, 2 Kicker DS coax in pillars Highs Amp: Kicker kx250.2, kx100.2 Wire: 4 Runs 1/0 gauge Knukonceptz Link to comment Share on other sites More sharing options...
banginAltima Posted May 2, 2009 Report Share Posted May 2, 2009 (edited) I wired my subs to 2 ohms today. Just like on the Rockford Site. But my Dmm is reading 1.5 ohms. Is this normal or what. I gotta run 2 Sundown Saz1500d's @ 2 ohms? Will I be able to do it or will I mess the amps up? Go into protect. What will happen. I am running the Fi 15" BL Dual 2 ohm subs. Fi subs never read what they say they are. As Kicker guy said you should be fine running them. Edited May 2, 2009 by banginAltima Quote If you build it, db's will come... NSPL World Record Holder Trunk 0-1800 watts---147.9 with 1722 clamped watts @ 40Hz(9-20-09). Competition Only Record Holder Trunk 0-500 watts---148.1 2006 Nissan Altima 3.5 SE Currently Rebuilding.... My 150db Plus Trunk Build I do box designs. [benH] 6:24 pm: clipping doesn't really hurt subs [benH] 6:24 pm: being an idiot is what blows subs Link to comment Share on other sites More sharing options...
Dr. Johnson Posted May 2, 2009 Report Share Posted May 2, 2009 I wired my 2 dual 2 ohm DC audio level 3 subs and I get 1.2 ohms at the amp. Tell me how it does that. lol I think it will be fine too. Quote Link to comment Share on other sites More sharing options...
zaxfire69 Posted May 2, 2009 Author Report Share Posted May 2, 2009 For sure stange. Quote Link to comment Share on other sites More sharing options...
Kasey Posted May 2, 2009 Report Share Posted May 2, 2009 (edited) On most specs list it will have the actual resistance BTL 15 DUAL 1 | DUAL 2 Fs: 35.6 Hz | 34.6 Hz Re: 0.7 Ohms/coil | 1.4 Ohms/coil Qms: 5.72 | 5.90 Qes: .24 | .22 Qts: .23 | .22 Mms: 256g | 272g Sd: 810cm^2 | 810cm^2 Vas: 71.6 l | 71.6 l Spl: 93.2dB 1W/1m | 93.1dB 1W/1m Bl: 18.3 N/A | 27.2 N/A Xmax: 28mm * | 28mm * Rms: 2000W * | 2000W * Sealed box: N/A cuft | N/A cuft Ported box: 3-5cuft | 3-5cuft Sub OD: 15.625” | 15.625” Cut ID: 14.125” | 14.125” Mounting depth: 8.750” | 8.750” Displacement: 0.21cuft | 0.21cuft Edited May 2, 2009 by 916PublicEnemy2 Quote "Audio is not a hobby it's a lifestyle" _____________________________Refs_1_Refs_2_____________________________ Link to comment Share on other sites More sharing options...
Derrick824 Posted May 2, 2009 Report Share Posted May 2, 2009 The amps won't have any problem with that. Quote Link to comment Share on other sites More sharing options...
dwz Posted May 2, 2009 Report Share Posted May 2, 2009 I wired my 2 dual 2 ohm DC audio level 3 subs and I get 1.2 ohms at the amp. Tell me how it does that. lol I think it will be fine too. Uhh that happened to me. I had 2 DVCs 4ohm each. When wired to 2 ohms I got 0.7ohms. Anything below 1.5 is weird for 2ohms... In my case, one of the VC's measured to 1ohm instead of 4ohms... It also wasn't performing as well. I basically blew the sub Quote Link to comment Share on other sites More sharing options...
Dr. Johnson Posted May 2, 2009 Report Share Posted May 2, 2009 Uhh that happened to me. I had 2 DVCs 4ohm each. When wired to 2 ohms I got 0.7ohms. Anything below 1.5 is weird for 2ohms...In my case, one of the VC's measured to 1ohm instead of 4ohms... It also wasn't performing as well. I basically blew the sub That really is not the same. I have 4 voice coils at 2ohms each that equal 1.2 at the amp. It should equal .5 or less. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.