E-Train Posted June 3, 2009 Report Share Posted June 3, 2009 With cutting sub holes you cant try and cut the whole hole at one time you have to cut like 1/4" at a time not try to cut through the whole piece 1 time or thats the way ive always seen it 1997 4 Runner Alpine CDA-9886 4 Fi Audio X Series 12's 1 Crunch GP3000D Pro DC Power Inc. Alternator(Kickin out 15+ volts!) Link to comment Share on other sites More sharing options...
David Posted June 3, 2009 Report Share Posted June 3, 2009 With cutting sub holes you cant try and cut the whole hole at one time you have to cut like 1/4" at a time not try to cut through the whole piece 1 time or thats the way ive always seen it I cut the full depth in one pass, if you have a good spiral upcut bit its like cutting threw butter with a hot knife. if you have a woodcraft store near you have a look at there bits, high quality and they last forever. My roundover and flush trim bit are made by diablo like 99vic suggested, very nice bits aswell Link to comment Share on other sites More sharing options...
Airborne Posted June 4, 2009 Report Share Posted June 4, 2009 I cut the full depth in one pass, if you have a good spiral upcut bit its like cutting threw butter with a hot knife.if you have a woodcraft store near you have a look at there bits, high quality and they last forever. My roundover and flush trim bit are made by diablo like 99vic suggested, very nice bits aswell I was dissapointed as hell when it took so long to cut the holes. I'll try a new bit and see what happens. Link to comment Share on other sites More sharing options...
Nate197 Posted June 4, 2009 Author Report Share Posted June 4, 2009 I picked up a craftsmen router yesterday http://i339.photobucket.com/albums/n443/li...87/P1010093.jpg Link to comment Share on other sites More sharing options...
Nate197 Posted June 4, 2009 Author Report Share Posted June 4, 2009 I picked up a craftsmen router yesterdayhttp://i339.photobucket.com/albums/n443/li...87/P1010093.jpg and here's the spiral bit http://i339.photobucket.com/albums/n443/li...87/P1010096.jpg Link to comment Share on other sites More sharing options...
tibs Posted June 4, 2009 Report Share Posted June 4, 2009 i cut with 1 pass also. unless its double baffle takes 2 passes Tibs 99 F-150 Build 8 twelves 8 - Re SE 12"s 2 - SunDown Audio Saz-3000d's 1 - vx4004 planet audio amp big 3 1/0 gauge MECHMAN 250 amp alt MySpace Link to comment Share on other sites More sharing options...
PUNKYOU007 Posted June 4, 2009 Report Share Posted June 4, 2009 or find someone to resharpen the bit you have. it cost alot less and alot of bits and saw blades just need a good sharpening Doethepaperboy "Bars of Pain" Doethepaperboy "Hero Remix" C. Arson d(-__-)b beer sucks...but i can bring some jose cuervo. Only problem is that it makes me horny and gives me the rams. So unless yall wanna fight and then have some great make up sex i will leave it home. Link to comment Share on other sites More sharing options...
Gotloud555 Posted June 14, 2009 Report Share Posted June 14, 2009 Haha! My bits sucks because it make too much screaming noise. What's the bit name again, spiral upcut?? Link to comment Share on other sites More sharing options...
Recommended Posts