Jump to content

97 Blazer A-pillar Pods


Recommended Posts

So I decided to fiberglass my a-pillars....been wanting to do it for awhile but couldn't find any a-pillar in local junk yards all of them had already been taken :(

So I got some balls and decided to glass my factory ones *gasp* :pardon:

Second time glassing anything and the way my dash is in my blazer I will have to see how I'm gonna wrap the bottom have some ideas :D

I will grind the rough stuff down in a lil bit....Heres what is done so far...far from done.

The pods will house a set of Rockford T152s components. (5.25")

Also some of you may wonder why I'm doing one at a time....well b/c I have the time to and I like working on one at a time.

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

  • Replies 48
  • Created
  • Last Reply

And before anyone asked no I wasn't glassing on the handmade oak table my dad made in my kitchen.

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

fun stuff huh lol might i suggest drillin a few small holes on the back side of the pilars themselves cuz then it will hold better to the plastic. resin dosnt hold to plastic very well and id hate to see ya havin to redo em cuz the pod breaks off or what not. lookin good though otherwise man.

Link to comment
Share on other sites

Okay I got the drivers side done today....I literally have no skin left on my fingers b/c I sanded for 8+ straight hours.....

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

looks like your off too a great start so far mang! keep it up! and moar pix pls :)

Thanks Brian and cracker!

All these pics and two responses.....people look and don't comment....this is why I usually don't post build logs....waste of my time if you ask me.

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Who's Online   2 Members, 0 Anonymous, 169 Guests (See full list)




×
×
  • Create New...