Hotdog Posted August 22, 2009 Report Posted August 22, 2009 What is the smallest ANL fuse I can put in the T10001bd amp and still be safe for full power at least for 1 competition? Quote (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764
Lowroll Posted August 22, 2009 Report Posted August 22, 2009 I could be wrong but doesnt it all depend on the ohm load & resistance in the wire from the battery to the amp? my amps have 3-40 amp fuses, but I have them running on 60 amp ANL's. sure the anl fuses are warped & discolored because of the strain they are under but they hold in competitions. Its all about your setup. Just get some anl fuses & try them. Quote Current System: Pioneer 6900 HU Front Stage: (for now) Soundstream tarantula 5.25 in the doors Soundstream tarantula 4x6 in the dash Kenwood 400.4 for mids & highs Bass: 4 Soundstream RW-12's 2 Power Acoustik Stax 4000/1D's single chamber box, 2.65 cubes. Currently under the knife being bagged Rebuilding err'thang
dmanson Posted August 22, 2009 Report Posted August 22, 2009 150 anl fuse potna. Quote 2-DC 15XLM2 D.7s 1-DC 5K amp (1) XS Power D6500(UNDERHOOD) and (1) XS3000(REAR) 3 runs 1/0ga for power and 2 runs of 1/0ga for negative. (2)-RFT165s components, ...... 4 separate 1 inch tweetersRF T600-2(fronts) Punch 450.4(rear) Audiocontrol 3.1. DC power 260amp alternator w/MLA Module
qu1cks1lver56 Posted August 22, 2009 Report Posted August 22, 2009 mine has a 150amp fuse in it. Quote First Gen Xterra: Always changing DNX 690HD RF 360.3RF T3002RF T4004RF T10001bdSilver Flute 6.5"s Tang Band 1" TweetersSundown X18 in 7cubes net tuned to 32hz Trust me .25 Blows your Load.
Hotdog Posted August 22, 2009 Author Report Posted August 22, 2009 mine has a 150amp fuse in it. Mine has a 150 in it also but I am talking about possible going to like 100 amp fuse long enough to make it 2 runs in the lane for 30 seconds. The reason for this is so i can drop down 1 class because I am barley over right now Quote (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764
07sOnAtA sp.ed Posted August 22, 2009 Report Posted August 22, 2009 mines gonna have a 200, just give alil xtra... lol, by that, i mean i didnt feel like changing it from my past aq2200d, and saz-1500 Quote CURRENTLY UNDER RE-CONSTRUCTION 2008 Hyundai Sonata Team T3 Audio Team Deadly Hertz Team SMD (Street Motivated Devastation)
dmanson Posted August 22, 2009 Report Posted August 22, 2009 Mine has a 150 in it also but I am talking about possible going to like 100 amp fuse long enough to make it 2 runs in the lane for 30 seconds. The reason for this is so i can drop down 1 class because I am barley over right now well i know the amp will require a 150 .............. good luck on trying the 100. Quote 2-DC 15XLM2 D.7s 1-DC 5K amp (1) XS Power D6500(UNDERHOOD) and (1) XS3000(REAR) 3 runs 1/0ga for power and 2 runs of 1/0ga for negative. (2)-RFT165s components, ...... 4 separate 1 inch tweetersRF T600-2(fronts) Punch 450.4(rear) Audiocontrol 3.1. DC power 260amp alternator w/MLA Module
Hotdog Posted August 22, 2009 Author Report Posted August 22, 2009 well i know the amp will require a 150 .............. good luck on trying the 100. well will there be any adverse effects on the amp if I put a 100 amp fuse in it and burn it in a burp? I dont want to mess anything up and I would rather move up a class and be safe, but if is safe to drop the fusing to 100 for a coupe burps then I would try it. Quote (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764
Chode69 Posted August 22, 2009 Report Posted August 22, 2009 wont hurt anything but if your system peaks and you hit louder and the amp is pulling say 115 amps and you only have 100A fuse your missing out on that much power....amp will be fine...just wont see any power Quote NoFearX18 said: Nick will bang just about anything.....LMAO....pun intended On 4/13/2010 at 9:51 AM, meade916 said: i was like DAMN, Chode is hardcore! he makes james look like a friendly person LOL! trainman0978 said: I dont know who is worse with the buttholes Chode or Big P... Team Deadly Hertz / Team DC Audio / Team XS Power 2010 DC AUDIO MEMBER OF THE YEAR!!! DuckretaryFEAR THE DUCK Durangho Chodes Blowthrough Build Youtube vids Muh Wife Need DC Audio? Hit me up for pricing!!!
Boon Posted August 23, 2009 Report Posted August 23, 2009 Hang on a second. Are we talking about the fuse IN the amp or an in-line one before it? The fuse IN it, do not change from the factory value. It shouldn't matter what value it is for competition. The inline fuse before it, you could probably get away with a 100A, especially if it's just burps. I think Jacob from Sundown said with ANLs you can often get away with a burp with crazy small fuses, IIRC he burped a 3000D off a 60A or something once?!? Quote 10.x volts fo' life!
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.