LSN2meBoom916 Posted April 11, 2007 Report Share Posted April 11, 2007 Ok-So this build has been "in the works" for a LOOOOOONG time, I'm just finally getting to "get busy" on it for reals and I also finally have a decent camera so I can snap pix of every screw/wire crimp for yall. Ride: 2006 Chevy 2500HD Duramax Diesel 4dr/quadcab/BigAssSOMMABITCHIN 4X4TRUCK.(it's the topic title, did you miss it somehow?) System: Deck: Stock unit (tape/cd/XM Radio) Front Mids: Infinity Kappa 6 1/2" coax Rear Mids: Infinity Kappa 6 1/2" coax. Subs: 3-Kicker L7-8's (dual 4ohm) Sub amp: Kenwood KAC 9152D 1800w Monoblock Mid amp: Kenwood KAC 8452-4 chann. Xstatic Battcap 800 Stinger Platinum Dist. block. 0/1ga power front to back (Maybe) an Audio Control Epic-160 Runnin some 0/1ga wire. Here's my "custom" (ghetto/homemade) wire puller. Essentially just a random ass piece of bent steel rod that I can wrap a straightened closehanger around and use to pull the hell outta a 0/1ga that won't thread thru the firewall w/ out mucho pulling. I wrapped it in an old sock to be easier on my hands. GM sidepost in gold. Threw some fatmat on the back wall Here's the 1st box I buit him just to get him HOOKED on audio and convinced I could fit something in there despite the limited space-It's 2 Credence 8's (round kicker solobarics) So once I had em convinced I could fit something cool in there...he got all excited and wanted to go as big as possible. So...my other buddy and I hooked him up on his Bday with 3 Kicker L7 8's I found for not that much BNIB. No usable space under seats....GREAT! So it's all "magically" gotta hide itself behind the seats...box, amp rack, and electrical. oh fun. COOGLE SAID:"bro thats how we got where we are... buy making messes ...... i still learn all the time you just gota be willing to ruck up some shit" "In order to attain the impossible, one must attempt the absurd." ~ Miguel de Unamuno"One machine can do the work of fifty ordinary men, but no machine can do the work of one extraordinary man" -Elbert Hubbard"A proud man can learn humility...but he will be proud of that too" ~I forget who.I'm far from perfect and I know it better than anyone, but I hope to be good at what I do, when I do it...Installs I've done:My Integra: http://www.stevemeadedesigns.com/board/ind...?showtopic=3161The Lexus : http://www.stevemeadedesigns.com/board/ind...?showtopic=1535Law's Maxima: http://www.stevemeadedesigns.com/board/ind...ic=5568&hl=Jeff's 2500HD: http://www.stevemeadedesigns.com/board/ind...ic=5382&hl=Acura RSX-S: http://www.stevemeadedesigns.com/board/ind...?showtopic=3142Z-32 300zx: http://www.stevemeadedesigns.com/board/ind...?showtopic=34602004 Civic 4dr: http://www.stevemeadedesigns.com/board/ind...?showtopic=8190Trunk/Corner Box: http://www.stevemeadedesigns.com/board/ind...c=16036&hl=1969 Chevy C-10: http://www.stevemeadedesigns.com/board/ind...c=20319&hl=Seat-Back AMP-RACK How-to: http://www.stevemeadedesigns.com/board/ind...ic=9428&hl=Bunch of subs still for salehttp://www.stevemeadedesigns.com/board/ind...l=lsn2meboom916"It's game night...we're playin......sex."~Quagmire"When disneyland started it was powered completely by orphan children running on treadmills to generate e-lectrissty…and today, them children are New York Yankees". ~Dale Gribble"Fill it with ice...then pour it up to the top of the ice...& Shut da Fu** up!" ~Urs truly. Link to comment Share on other sites More sharing options...
LSN2meBoom916 Posted April 11, 2007 Author Report Share Posted April 11, 2007 New Box: 3-L7-8's, lil under 1.5ft^3 net, sealed (that's .5ft^3 per sub) The amp rack spans the whole back wall of the cab. It doesn't sit on top of the box, it is/will be mounted to the back wall via 8mm bolts/nuts from inside the back wall sheet metal/interior back wall, and hover about 1/2" above the box. COOGLE SAID:"bro thats how we got where we are... buy making messes ...... i still learn all the time you just gota be willing to ruck up some shit" "In order to attain the impossible, one must attempt the absurd." ~ Miguel de Unamuno"One machine can do the work of fifty ordinary men, but no machine can do the work of one extraordinary man" -Elbert Hubbard"A proud man can learn humility...but he will be proud of that too" ~I forget who.I'm far from perfect and I know it better than anyone, but I hope to be good at what I do, when I do it...Installs I've done:My Integra: http://www.stevemeadedesigns.com/board/ind...?showtopic=3161The Lexus : http://www.stevemeadedesigns.com/board/ind...?showtopic=1535Law's Maxima: http://www.stevemeadedesigns.com/board/ind...ic=5568&hl=Jeff's 2500HD: http://www.stevemeadedesigns.com/board/ind...ic=5382&hl=Acura RSX-S: http://www.stevemeadedesigns.com/board/ind...?showtopic=3142Z-32 300zx: http://www.stevemeadedesigns.com/board/ind...?showtopic=34602004 Civic 4dr: http://www.stevemeadedesigns.com/board/ind...?showtopic=8190Trunk/Corner Box: http://www.stevemeadedesigns.com/board/ind...c=16036&hl=1969 Chevy C-10: http://www.stevemeadedesigns.com/board/ind...c=20319&hl=Seat-Back AMP-RACK How-to: http://www.stevemeadedesigns.com/board/ind...ic=9428&hl=Bunch of subs still for salehttp://www.stevemeadedesigns.com/board/ind...l=lsn2meboom916"It's game night...we're playin......sex."~Quagmire"When disneyland started it was powered completely by orphan children running on treadmills to generate e-lectrissty…and today, them children are New York Yankees". ~Dale Gribble"Fill it with ice...then pour it up to the top of the ice...& Shut da Fu** up!" ~Urs truly. Link to comment Share on other sites More sharing options...
LSN2meBoom916 Posted April 11, 2007 Author Report Share Posted April 11, 2007 More box buildin... Checkin fit on Box+Rack+Battcap What fun would this box be w/out...PLEXI! 3/4" acrylic BUT.. The place I got the plexi said they only had a 30 and 45degree angle jig....so they couldn't bevel it for me.LAME. OK fine so I made my own damn jig. And then I chopped the piece into 3 inserts. COOGLE SAID:"bro thats how we got where we are... buy making messes ...... i still learn all the time you just gota be willing to ruck up some shit" "In order to attain the impossible, one must attempt the absurd." ~ Miguel de Unamuno"One machine can do the work of fifty ordinary men, but no machine can do the work of one extraordinary man" -Elbert Hubbard"A proud man can learn humility...but he will be proud of that too" ~I forget who.I'm far from perfect and I know it better than anyone, but I hope to be good at what I do, when I do it...Installs I've done:My Integra: http://www.stevemeadedesigns.com/board/ind...?showtopic=3161The Lexus : http://www.stevemeadedesigns.com/board/ind...?showtopic=1535Law's Maxima: http://www.stevemeadedesigns.com/board/ind...ic=5568&hl=Jeff's 2500HD: http://www.stevemeadedesigns.com/board/ind...ic=5382&hl=Acura RSX-S: http://www.stevemeadedesigns.com/board/ind...?showtopic=3142Z-32 300zx: http://www.stevemeadedesigns.com/board/ind...?showtopic=34602004 Civic 4dr: http://www.stevemeadedesigns.com/board/ind...?showtopic=8190Trunk/Corner Box: http://www.stevemeadedesigns.com/board/ind...c=16036&hl=1969 Chevy C-10: http://www.stevemeadedesigns.com/board/ind...c=20319&hl=Seat-Back AMP-RACK How-to: http://www.stevemeadedesigns.com/board/ind...ic=9428&hl=Bunch of subs still for salehttp://www.stevemeadedesigns.com/board/ind...l=lsn2meboom916"It's game night...we're playin......sex."~Quagmire"When disneyland started it was powered completely by orphan children running on treadmills to generate e-lectrissty…and today, them children are New York Yankees". ~Dale Gribble"Fill it with ice...then pour it up to the top of the ice...& Shut da Fu** up!" ~Urs truly. Link to comment Share on other sites More sharing options...
audiofanaticz Posted April 11, 2007 Report Share Posted April 11, 2007 looking real creative so far! Im assuming that the front baffal is going to be plexi then? If so are you planning on lighting up the box? Cant wait to see more pics Link to comment Share on other sites More sharing options...
BassJunkie Posted April 11, 2007 Report Share Posted April 11, 2007 That truck's sexy looking GREAT 1986 C20 Suburban 9 American Bass XFL 15's B2 M1MKII 14v XS Power Batteries Maxwell Caps Acoustical energy is free. Electrical energy is not you havent lived until you've hit a screw with a router. Link to comment Share on other sites More sharing options...
LSN2meBoom916 Posted April 11, 2007 Author Report Share Posted April 11, 2007 Hells yea I'm lightin this beezy up! If you see plexi...there WILL be lights. I wouldn't replace a perfectly good piece of 3/4" mdf that was already cut to fit nicely w/ sub holes and all, with a $150 piece of plexi just so you could see how small the interior of the box is, it's gettin lit up fasho...and I have some tricks for that one too. So...I jigged out some cut outs from the underside of the box in the shape of a 15" neon tube for each sub/section. I had to mod/chop down the neon tubes cuz they were a lil bulkier than i wanted so just roto-zipped off all the non-essentials. COOGLE SAID:"bro thats how we got where we are... buy making messes ...... i still learn all the time you just gota be willing to ruck up some shit" "In order to attain the impossible, one must attempt the absurd." ~ Miguel de Unamuno"One machine can do the work of fifty ordinary men, but no machine can do the work of one extraordinary man" -Elbert Hubbard"A proud man can learn humility...but he will be proud of that too" ~I forget who.I'm far from perfect and I know it better than anyone, but I hope to be good at what I do, when I do it...Installs I've done:My Integra: http://www.stevemeadedesigns.com/board/ind...?showtopic=3161The Lexus : http://www.stevemeadedesigns.com/board/ind...?showtopic=1535Law's Maxima: http://www.stevemeadedesigns.com/board/ind...ic=5568&hl=Jeff's 2500HD: http://www.stevemeadedesigns.com/board/ind...ic=5382&hl=Acura RSX-S: http://www.stevemeadedesigns.com/board/ind...?showtopic=3142Z-32 300zx: http://www.stevemeadedesigns.com/board/ind...?showtopic=34602004 Civic 4dr: http://www.stevemeadedesigns.com/board/ind...?showtopic=8190Trunk/Corner Box: http://www.stevemeadedesigns.com/board/ind...c=16036&hl=1969 Chevy C-10: http://www.stevemeadedesigns.com/board/ind...c=20319&hl=Seat-Back AMP-RACK How-to: http://www.stevemeadedesigns.com/board/ind...ic=9428&hl=Bunch of subs still for salehttp://www.stevemeadedesigns.com/board/ind...l=lsn2meboom916"It's game night...we're playin......sex."~Quagmire"When disneyland started it was powered completely by orphan children running on treadmills to generate e-lectrissty…and today, them children are New York Yankees". ~Dale Gribble"Fill it with ice...then pour it up to the top of the ice...& Shut da Fu** up!" ~Urs truly. Link to comment Share on other sites More sharing options...
sean 371 Posted April 11, 2007 Report Share Posted April 11, 2007 This is lookin great man. Any worries about sub excursion clearance with that back seat so close? A couple links to some box builds: Tahoe Box 1, Tahoe Box 2, Nissan Titan, VW GTI, Mini-Bump, Hummer H2, Ford F-150 My own car builds (current setup --- under construction): Overall Thread, Kickpods, Dash, Back Doors Subwoofer Wall Link to comment Share on other sites More sharing options...
LSN2meBoom916 Posted April 11, 2007 Author Report Share Posted April 11, 2007 NOPE. Subs will be mounted to the plexi which is set IN 3/4" from the edge. There will be a trim piece surrounding the plexi and subs to hide the screws/ugly edges/glued areas behind the plexi and everything inside and out will be covered nicely. Just stay tuned I'll have more pics as I get time. I have like a billion pics and this bish aint even put together yet. Did a lil more w/ the plexi inserts today and decided I'mma switch em to 1/2" plexi instead of 1/4". Thin stuff is too prone to cracking when screws go thru to clamp it down and I dont trust glue alone. COOGLE SAID:"bro thats how we got where we are... buy making messes ...... i still learn all the time you just gota be willing to ruck up some shit" "In order to attain the impossible, one must attempt the absurd." ~ Miguel de Unamuno"One machine can do the work of fifty ordinary men, but no machine can do the work of one extraordinary man" -Elbert Hubbard"A proud man can learn humility...but he will be proud of that too" ~I forget who.I'm far from perfect and I know it better than anyone, but I hope to be good at what I do, when I do it...Installs I've done:My Integra: http://www.stevemeadedesigns.com/board/ind...?showtopic=3161The Lexus : http://www.stevemeadedesigns.com/board/ind...?showtopic=1535Law's Maxima: http://www.stevemeadedesigns.com/board/ind...ic=5568&hl=Jeff's 2500HD: http://www.stevemeadedesigns.com/board/ind...ic=5382&hl=Acura RSX-S: http://www.stevemeadedesigns.com/board/ind...?showtopic=3142Z-32 300zx: http://www.stevemeadedesigns.com/board/ind...?showtopic=34602004 Civic 4dr: http://www.stevemeadedesigns.com/board/ind...?showtopic=8190Trunk/Corner Box: http://www.stevemeadedesigns.com/board/ind...c=16036&hl=1969 Chevy C-10: http://www.stevemeadedesigns.com/board/ind...c=20319&hl=Seat-Back AMP-RACK How-to: http://www.stevemeadedesigns.com/board/ind...ic=9428&hl=Bunch of subs still for salehttp://www.stevemeadedesigns.com/board/ind...l=lsn2meboom916"It's game night...we're playin......sex."~Quagmire"When disneyland started it was powered completely by orphan children running on treadmills to generate e-lectrissty…and today, them children are New York Yankees". ~Dale Gribble"Fill it with ice...then pour it up to the top of the ice...& Shut da Fu** up!" ~Urs truly. Link to comment Share on other sites More sharing options...
LSN2meBoom916 Posted April 13, 2007 Author Report Share Posted April 13, 2007 Primered Almost ready for these guys Drew in where the trim & plexi will show COOGLE SAID:"bro thats how we got where we are... buy making messes ...... i still learn all the time you just gota be willing to ruck up some shit" "In order to attain the impossible, one must attempt the absurd." ~ Miguel de Unamuno"One machine can do the work of fifty ordinary men, but no machine can do the work of one extraordinary man" -Elbert Hubbard"A proud man can learn humility...but he will be proud of that too" ~I forget who.I'm far from perfect and I know it better than anyone, but I hope to be good at what I do, when I do it...Installs I've done:My Integra: http://www.stevemeadedesigns.com/board/ind...?showtopic=3161The Lexus : http://www.stevemeadedesigns.com/board/ind...?showtopic=1535Law's Maxima: http://www.stevemeadedesigns.com/board/ind...ic=5568&hl=Jeff's 2500HD: http://www.stevemeadedesigns.com/board/ind...ic=5382&hl=Acura RSX-S: http://www.stevemeadedesigns.com/board/ind...?showtopic=3142Z-32 300zx: http://www.stevemeadedesigns.com/board/ind...?showtopic=34602004 Civic 4dr: http://www.stevemeadedesigns.com/board/ind...?showtopic=8190Trunk/Corner Box: http://www.stevemeadedesigns.com/board/ind...c=16036&hl=1969 Chevy C-10: http://www.stevemeadedesigns.com/board/ind...c=20319&hl=Seat-Back AMP-RACK How-to: http://www.stevemeadedesigns.com/board/ind...ic=9428&hl=Bunch of subs still for salehttp://www.stevemeadedesigns.com/board/ind...l=lsn2meboom916"It's game night...we're playin......sex."~Quagmire"When disneyland started it was powered completely by orphan children running on treadmills to generate e-lectrissty…and today, them children are New York Yankees". ~Dale Gribble"Fill it with ice...then pour it up to the top of the ice...& Shut da Fu** up!" ~Urs truly. Link to comment Share on other sites More sharing options...
civichatch Posted April 13, 2007 Report Share Posted April 13, 2007 Great work man everything looks perfect. System Specs: Alpine SWR-1542D 15" sub Sealed Subwoofer Box MTX mxa 6001 Class D 774watts RMS @ 2ohms MTX Bass Knob Pioneer 6.5's in doors MTX Thunderdome 6x9 in rear Stinger 1 Farad capacitor 80 amp stinger fuse BIG 3 in 4 gauge wire 4 gauge power/ground wire JVC MP3 CD Car Deck (KD-G320) 12 gauge Monster speaker wire to Sub 16 gauge Stinger speaker wire to doors Stinger Gold Plated Battery Terminals Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.