LoudBlazer Posted September 21, 2009 Report Posted September 21, 2009 Looks like one, but doesnt look liek a complete crack but it is on both sides of the wall. Am I out a engine? lol Quote 1997 2 Door Blazer Bagged & Body Dropped SBC/TH350
finkster Posted September 21, 2009 Report Posted September 21, 2009 (edited) yea, unfortunately id say this block is done does your car start? Edited September 21, 2009 by finkster Quote DAT 4125------>RE XXX comps active Eclipse cd7000 I serve drunks for a living
doug118 Posted September 21, 2009 Report Posted September 21, 2009 if it still runs I'd say drive it until it actually dies Quote 2001 Tahoe. Huge front stage and 55+ substage http://www.stevemeadedesigns.com/board/topic/196418-another-tahoe-build-huge-front-stage-and-155-substage/
ugpbmx Posted September 21, 2009 Report Posted September 21, 2009 it depends how far the crack goes down the cylinder wall. if its not too far you can shave the block. Quote MY TRUCK BUILD - 1976 F-100 Ranger. Fully built 482 big block, 4 DC lvl4 15's in a blowthrough, plenty of custom fabrication. MY HATCH BUILD - 1993 Honda Civic DX Hatchback . Clean daily driver, dropped, subtle customization.
LOOKINFORSPL? Posted September 21, 2009 Report Posted September 21, 2009 it depends how far the crack goes down the cylinder wall. if its not too far you can shave the block. like the post above drive it till it blows,but you cant cause its torn apart already either way if you have to shave the block the motor has to come out and torn apart.but since you have the heads off they have to be shaved anyways and replacing the gaskets why not be safe and have the crack checked,and then rebuild cause if it blows later you are out about 200 bucks for gaskets and labor, if im incorrect about something let me know? i just dont want you to waste time and money,for doing the job twice.hope this helped Quote
ugpbmx Posted September 21, 2009 Report Posted September 21, 2009 yea exactly, i would just drive it till it quits and either shave it and all that jazz, or snag a new engine Quote MY TRUCK BUILD - 1976 F-100 Ranger. Fully built 482 big block, 4 DC lvl4 15's in a blowthrough, plenty of custom fabrication. MY HATCH BUILD - 1993 Honda Civic DX Hatchback . Clean daily driver, dropped, subtle customization.
LoudBlazer Posted September 21, 2009 Author Report Posted September 21, 2009 This is just one of my 3 engines. I just got this one and got the heads off to check wear and tear. Im thinking maybe I could sleeve it. Im honestly prolly gonna go get $10-12 from the scrap yard and buy a new 350 4 bolt main from Performance Automotive Warehouse. Well Atleast I got a TH350 in the deal lol. Quote 1997 2 Door Blazer Bagged & Body Dropped SBC/TH350
Aaron813 Posted September 21, 2009 Report Posted September 21, 2009 Hell grind a deep groove on the top and lay a nice ass tig weld down on it lol seriously though that sucks man Quote
Polecat Posted September 21, 2009 Report Posted September 21, 2009 crack between cylinder walls, toast, unless you want to sleeve it, IMHO, blocks are cheap, get rid of it. Quote Behind every great man....is an underwear tag!
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.