Jump to content
Second Skin Audio

how do i...


Recommended Posts

how do i figure out how big a box needs to be for a sub, if i dont have enclosure specs?

looking at a cheap 15's setup.

would 3 cuft per 15 work?

VCdia: 2-3/8" *Le: 2.36 mH *Impedance: 8 ohms *Re: 5.81 ohms *Frequency response: 27-1,000 Hz *Fs: 27 Hz *SPL: 92 dB 1W/1m *Vas: 17.50 cu. ft. *Qms: 5.90 *Qes: 0.99 *Qts: 0.85 *Xmax: 3 mm

24pm3xe.jpg

im taking out my passenger seat, battery is disconnected, going to unwire and take out the three amps, take out the 70+ lb box, then the platform so i can crimp 1 wire.

Almost as bad as those fegs that put those horns in their grills and roll down the street distorting the block....

1990 Jeep Cherokee 2 Dr.

Big-3 in 0g on Stock Alt.

Pioneer 6.5" and 5.25"s temp. until i can afford the new crescendos.

Pioneer 6000ub Reciever

NO amps at the moment. SA-15 on 1kw coming soon.

MSG Me for a free enclosure design!!

Flared port kits coming soon!!

Link to comment
Share on other sites

Talk about vague.

Course, I'm one to be talking. :rofl:

My comp setup (Not bad for what it is):

HP Compaq Presario V6120US laptop with:

15.4" widescreen

AMD Turion 64 X2 1.6GHz processor

2x1GB stick DDR2 SDRAM (667 Mhz)

Seagate Momentus 500GB SATA HDD

128MB shared video memory

Windows 7 Home Premium 64 bit

12 cell Lithium Ion battery (actual battery usage time: 6 hours)

What it does:

635670364.png4532707.png

On a USB 2.0 Wireless card

Link to comment
Share on other sites

300 watts per driver rated, ported at 30hz, would run 6 of em.

http://www.parts-express.com/pe/pshowdetl....tnumber=299-906

just thinking about possible setups in my van : /

would prolly use a boss 2500 watt mono amp.

just trying to get the most bump for the buck

24pm3xe.jpg

im taking out my passenger seat, battery is disconnected, going to unwire and take out the three amps, take out the 70+ lb box, then the platform so i can crimp 1 wire.

Almost as bad as those fegs that put those horns in their grills and roll down the street distorting the block....

1990 Jeep Cherokee 2 Dr.

Big-3 in 0g on Stock Alt.

Pioneer 6.5" and 5.25"s temp. until i can afford the new crescendos.

Pioneer 6000ub Reciever

NO amps at the moment. SA-15 on 1kw coming soon.

MSG Me for a free enclosure design!!

Flared port kits coming soon!!

Link to comment
Share on other sites

well i'd stay away from that boss amp for one... but that woofer states "recommended for sealed enclosures" i'd probably do 1.5 that's a tiny ass woofer some one else will chime in with better info

Team sundownWESTCOASTSPL.COM we're throwing dbdrag events very soon visit the website for details

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 1373 Guests (See full list)

×
×
  • Create New...