sundownz Posted December 23, 2009 Author Report Share Posted December 23, 2009 Either moving the amps to the sides OR putting the side panels back in is not working (I was trying a suggestion to move the amps here instead of in front of the box)... so next step is to put my old amp rack back in: If the old amp rack doesn't bring it back to at least the original score I will take the plastic panels back out. Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected] Link to comment Share on other sites More sharing options...
sundownz Posted December 23, 2009 Author Report Share Posted December 23, 2009 I hit 155.7 right as one amp went into protect with the panels OUT and the amps still on the sides. Impedance seems to have changed with the amp location... going to try sliding the box around. Seems I am louder with the panels out after all. Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected] Link to comment Share on other sites More sharing options...
J00bles Posted December 23, 2009 Report Share Posted December 23, 2009 Seems I am louder with the panels out after all. didnt you decide that from all of the deadening you put in? i thought you did before and after videos during the second skin to show SPL increases. Quote 8 DC Level 4 M2 15s2 DC Audio 5ks26^2 clamshell tuned to 30hz9 Kinetik 1400sMechman externally reg'd 340 S seriesin a 99 Jeep Cherokee Click to see J00bles' Youtube Channel Link to comment Share on other sites More sharing options...
Team Nemesis-DJ Posted December 23, 2009 Report Share Posted December 23, 2009 didnt you decide that from all of the deadening you put in? i thought you did before and after videos during the second skin to show SPL increases. No ,he never put the panels back in .. Quote Link to comment Share on other sites More sharing options...
Decaf Posted December 23, 2009 Report Share Posted December 23, 2009 Sony Xplod from Best Buy with iPod connector http://www.bestbuy.com/site/Sony+-+Xplod+5...d=1218135740151 Had done well for me. u ever put the rcas on an oscope... u might have hidden tenths there Quote Link to comment Share on other sites More sharing options...
tacomabanga1986 Posted December 23, 2009 Report Share Posted December 23, 2009 hmm, my pioneer has 6.5v preouts but is it regulated from +6 to -24? i keep mine on -10 on sub preout and im gunna run active sometime soon n was wondering how much this varies cause the gain on my 4ch starts @ like 6v i think but my gain on my mids n highs are at -10 too @ 12db/oct n was wondering how much this effects anything amp wise? i dont mean to be off topic but i was gunna start comepeteing n was wondering if i should leave my subs gain level on the deck @ 0 and just turn the subs amp gain up n down? my deck goes to 40 and doesnt really distort at any levels from 0 to 40 really, and it has a shit ton of features n was wondering if this would more likely harm my subs or what from burpin em with sub gain higher than what i got it set to? anyways sundown looks like its doin somethin lol how do u like ur sony? Quote here's a link to my system 99 toyota tacoma , 2 mtx 8000 1504's in a sealed downfire , 1000w memphis amp here's a link to my other system my 90 geo prizm test car heres a thread i got of new songs u can dl that are legal = Some Good Bangage/you Can Dl These Free And Legit Link to comment Share on other sites More sharing options...
Gotloud555 Posted December 26, 2009 Report Share Posted December 26, 2009 nice score.. Dope Quote Link to comment Share on other sites More sharing options...
mhart Posted December 27, 2009 Report Share Posted December 27, 2009 wow, great score! Quote '00 Honda Civic Si IASCA stock trunk/pickup 1 World Record 4/20 150.6/150.7dBTeam DC Team XS Power Team ISB Steve's Body Shophttp://www.dcsoundlab.com/ Link to comment Share on other sites More sharing options...
sundownz Posted January 15, 2010 Author Report Share Posted January 15, 2010 UPDATE: I have moved to 16v but still around the same score... figuring out why. My impedance rise is insanely low with the D1 coils and the amps at 0.25 each... I may need to use D2 coils *laughs* 0.25 actual DCR per amplifier with a rise to 0.8 per amplifier -- little on the low side! When I kick it one more click past the 155.9 - 156.0 level the amps get protect happy. I need to re-build with a D2 which would give me 0.45 per amp actual DCR and should net 1.44 per amplifier... which based on earlier testing can still give me around 14,000 watts from the pair of 4500s on 18v. Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected] Link to comment Share on other sites More sharing options...
sundownz Posted January 15, 2010 Author Report Share Posted January 15, 2010 I may also just throw four 3500s in there at 0.5 each -- that could do it Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected] Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.