UMGixxer Posted February 8, 2010 Report Share Posted February 8, 2010 Please explain to me why this will not sound good or how i can fix this if it is a problem trying to tune my box to 33-34Hz, its 3"h x 14"w x and 14"l thru the middle Quote Link to comment Share on other sites More sharing options...
Guest Posted February 8, 2010 Report Share Posted February 8, 2010 the port length is uneven. Quote Link to comment Share on other sites More sharing options...
MrSkippyJ Posted February 8, 2010 Report Share Posted February 8, 2010 Please explain to me why this will not sound good or how i can fix this if it is a problemtrying to tune my box to 33-34Hz, its 3"h x 14"w x and 14"l thru the middle Well I would say you need a baffle and a top, but if you fix that it might work. Seriously, I am not good with ports so I will let someone who knows tell you! Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
tlee2 Posted February 8, 2010 Report Share Posted February 8, 2010 2 subs? 1 sub? Quote 6 Sundown X 15s 2 Sundown NS1 V2s C Pillar 4th order Bagged Suburban on 24s http://youtube.com/tlee333 Link to comment Share on other sites More sharing options...
UMGixxer Posted February 8, 2010 Author Report Share Posted February 8, 2010 it will be 4 subs total, two 12s per side, there are two center walls missing in that pic, but it will be two enclosures Quote Link to comment Share on other sites More sharing options...
IH8PunkRok Posted February 8, 2010 Report Share Posted February 8, 2010 if you make the back of the port look like the front it should be fine Quote -Matt2005 Dodge Magnum RTJVC KD-AVX1 2 PPI S580.2 Obsidian Audio ST1 Horn Tweeters PRV 8MB450s Audio Legion 3500.1D 2 RE MT 18s 360 ah LiFePO4 BatterySHCA 2/0 155.2 @ 29 hzKicker CVR 15's buildDD 3512e buildMini T-Line Build(6) 8s BuildNightshade 15s Wall BuildMagnum AB XFL 12s BuildNewest Magnum Build Link to comment Share on other sites More sharing options...
Forevrbumpn Posted February 8, 2010 Report Share Posted February 8, 2010 use any port formulas at all to calculate this? obviously fiberglassed so tuning wont be known till complete, but as stated, uneven port exits, nothing will be accurate, possibly even a slight cancellation Quote I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy. Link to comment Share on other sites More sharing options...
Namosh Posted February 8, 2010 Report Share Posted February 8, 2010 if you make the back of the port look like the front it should be fine That's what I would do. Quote My Ram Quad Cab Blow-through Link to comment Share on other sites More sharing options...
UMGixxer Posted February 8, 2010 Author Report Share Posted February 8, 2010 so you all think this will give better results Quote Link to comment Share on other sites More sharing options...
Neo_frog Posted February 8, 2010 Report Share Posted February 8, 2010 Most likely you'll see better results, and you'll be able to calculate your tuning better since it's consistent area throughout. Quote Need an install? Hit me up.[email protected]Got car audio questions? Check here first!Everything you need to know. =]http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/ Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.