andym85 Posted July 3, 2007 Report Posted July 3, 2007 7" may be the length of 2 aero ports attached end to end, but you do not measure depth that way, its half way thru the aero port, so if an aero port is about 3.5" its more likely about 1.75" deep you are looking at oh yea, i forgot areos have a little odd tuning calculation due to the flares... Quote i likes me some audio stuff...
zaxfire69 Posted July 3, 2007 Author Report Posted July 3, 2007 Yeah that is what I will be running..The 15" Fi BL..Thanks everyone for the Happy Birthday..As far as box demensions that is where I am needing the Schooling...I have 16" of height to work with..So it is a tight fit...As far as the width goes I can run at least 30" wide...I need to tightn up on my math skills...F... Quote
Derrick824 Posted July 3, 2007 Report Posted July 3, 2007 4cu ft net w/ two 4" aeros = 15.34" long for 30hz tuning (from WinISD). FYI, 4" aeros flare to flare = 6" long. Quote
zaxfire69 Posted July 5, 2007 Author Report Posted July 5, 2007 Hey Derrick..You seem like you know about these Aero ports well..You wanna help me build this Beast??? Sub facing forward Aeroports shooting into the cabin through the rear deck, Trunk Sealed off...?? Quote
Derrick824 Posted July 5, 2007 Report Posted July 5, 2007 I can help you with box building & tuning but as far as which direction to point your subs & ports, its a matter of test and tune. In my experience with trunk cars, most subs/boxes do best facing back and some do better facing forward. I've even had a box do well facing up but I've never sealed off a trunk so I can't help you there. Quote
zaxfire69 Posted July 5, 2007 Author Report Posted July 5, 2007 (edited) Hold On an I will render what I am wanting to do using Google Sketch..And I will post a .Jpg Here ya go..By no means perfect, but I will need internal Volume around 4.0 cuft..Will be using the 4 inch Aeroports tuned to 30Hz...What can you come up with me dimension wise..Also need to stay around 16 inches tall maybe 17...My sub displaces .18 cuft... Edited July 5, 2007 by zaxfire69 Quote
emperorjj1 Posted July 5, 2007 Report Posted July 5, 2007 damn thats pretty close to what im looking to build... how exactly do you figure out the areoports derrick? i have 2 6" areos and im building a build for 2 15" re XXX Quote J. JMy CardomainFINISHED COBALT SS/SC DUAL ALTERNATOR PICS theres no such thing as too expensive when it comes to upgrades like that, because imo if you are gonna spend to upgrade then do it correctly rather then be a cheap ass ricer
Derrick824 Posted July 5, 2007 Report Posted July 5, 2007 how exactly do you figure out the aeroports derrick?i have 2 6" areos and im building a build for 2 15" re XXX I use WinISD to calculate the tuning. Quote
babyjoker Posted July 5, 2007 Report Posted July 5, 2007 damn thats pretty close to what im looking to build... how exactly do you figure out the areoports derrick?i have 2 6" areos and im building a build for 2 15" re XXX where did u get 6'' areos from? Quote 1999 Eclipse N/T 12'' Fi BTL Gp3000d PM D3100
andym85 Posted July 5, 2007 Report Posted July 5, 2007 where did u get 6'' areos from? me!! Quote i likes me some audio stuff...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.