n8ball2013 Posted July 27, 2010 Report Posted July 27, 2010 hey i colormatched my calipers THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger.
98crewcab Posted July 27, 2010 Report Posted July 27, 2010 hey i colormatched my calipers lol-NICE!!! lookin tits kasey, when you coming by to figure out whateva your going to need for your hoe? 06 2500hd, 6.0L, 4l80e, 4wd, (muah work truck) 7" BDS HC lift kit (5) 37x13.5R18 Toyo Open Country M/Ts (5) 18x10 Moto Metal MO962 tablet in lieu of deck blue tooth interconnect to soundstream eq (for volume control and bass control) 4 Alpine type r 10's 6 cubes net, 80sqin's port, tuned to 33hz 2 brutus brx5000.5's 2 pairs 3" polk audio for a pillars 4 pairs polk audio 6.5 comps 1 pair 8" polk audio for mids 2 xspower d3400 batteries.....learning alot from meade and his circle of some of the baddest installers ive seen- thanks guys, for not being so cocky and posting the way it should be done!P.S. Thanks Steve....for the demo!!!! loud as fauk!
Entent Posted July 28, 2010 Report Posted July 28, 2010 hey what did you use to blackout your lights like that im looking to do the same to my truck is it that night shade spray? Subs: 2 Dual 4 DC lvl 3 12's in ported box 34hz tune wired to 1 ohm Hu: Eclipse 5425 Amp: Soundstream pcx1500d
DaVibe Posted July 28, 2010 Report Posted July 28, 2010 What did you use to bring them back to the OEM state?
thehoe92 Posted July 28, 2010 Author Report Posted July 28, 2010 After looking at the pictures again I saw your, pay no attention to my turn signals comment. I fail at reading. haha its all good I knew someone would say something about them regardless of whether or not I posted that on there Just a question, You're getting new tires, right? Won't you scrape the paint off the edge of the rim when your mounting/dismounting the new/old tires? Or is there some way of doing it without fucking the rim? Second? When are you painting staves rims!? And I believe I also recommended painting the boss purple aswell Yes I'm getting "new" tires, they have been used for a little bit but they are still new to me well this is the way I see it.. if they scrape the paint off the rim by mounting new tires on that means they would be scraping chrome off the lip if I didn't have the paint on and I can almost guarantee they would never do anything like that if they do scrape some paint off the very outer lip I'm not worried.. a.) because I need to repaint the one I painted in the first place and b.) they would be helping me out on the other 3 rims by getting some paint off haha! I don't know yet.. our schedules keep clashing one day I'm free and he's busy and the next he's free and I've got work so hopefully soon because I know he wants those rims painted and I want new tires sorry.. props to you as well I might have to jock you but with like a bright green lol haha do ET!! make your nali stand out hey i colormatched my calipers I wouldn't be color matching mine I would be painting them purple so joo win! lol-NICE!!! lookin tits kasey, when you coming by to figure out whateva your going to need for your hoe? I don't know not next week for sure, I'll be gone but maybe the week after that? hey what did you use to blackout your lights like that im looking to do the same to my truck is it that night shade spray? hate that night shade crap!! always comes out dull and never looks right to me.. unless you have a flat black truck then it will look good but personally I like the glossy look not a necessary step but I found better results with it.. sand down your stock tail lights until they are completely smooth use some degreaser or even paint thinner and wipe it down once you are done sanding to get all the debris off and don't touch them afterwards start shooting down RUSTOLEUM LENS TINT however many coats you want let it dry then once its completely dry get some rubbing compound and do work it doesn't need clear because its already in the can oh and post pics! What did you use to bring them back to the OEM state? lacquer thinner, a rag (not paper towels the lacquer thinner evaporates out of the towels), some patience and a fan so you don't start huffin that shit! haha afterwards they come out a little dull but nothing some polish can't bring back to normal state! Wouldnt be thehoe92 without teh purple
mason313 Posted July 28, 2010 Report Posted July 28, 2010 Maybe you kno I removed the badges on my truck and you can notice where there used to be what you you say to do to make it not so noticable? 2 18" fi btls 2 sprinter batts 165ah 1 cresenscdo 3k 1 mechman 270a 1 kinetik 2000 under hood
thehoe92 Posted July 28, 2010 Author Report Posted July 28, 2010 Maybe you kno I removed the badges on my truck and you can notice where there used to be what you you say to do to make it not so noticable? elbow grease rubbing compound and an orbital buffer should even it out some I debadged, demolded and took the fender flares off the first week I had my hoe so its had time to weather and fade away on top of the millions of coats of polish, scratch remover, swirl remover, wax and whatever else on top of it Wouldnt be thehoe92 without teh purple
mantz88 Posted July 28, 2010 Report Posted July 28, 2010 Random question: What amp is your alt? 2 fully loaded 18" fi BTL 1 Sundown SAZ-3500 2003 Yukon build
C-Fizzy Posted July 28, 2010 Report Posted July 28, 2010 i believe its a DC power 270 under construction I hate People with crappy primered cars rolling on hubcaps that are louder then me. u hate c-fizzy?
thehoe92 Posted July 28, 2010 Author Report Posted July 28, 2010 i believe its a DC power 270 got it! with the smaller pulley of course for better at idle amperage and wtf is this supposed to mean? I am changing all products.... And discussion of current stuff is not in our daily routine.Unfortunately there has been another company selling "t3 audio" products.... And I can not fight all of these fires right now on forums. Jan 2011 we will be up and going with all USA built products and inhouse control. If u want to freeze it with my message, or a message to the readers that will be fine. Thank you, Johnathan I have been patient enough.. if I have to wait until January to get subs I'm going to flip a bitch! Wouldnt be thehoe92 without teh purple
Recommended Posts
Archived
This topic is now archived and is closed to further replies.