pittross Posted January 30, 2011 Report Posted January 30, 2011 i just wanna know what is the purpose of straping your amps is it just to make one amp control everything Quote
C-Fizzy Posted January 30, 2011 Report Posted January 30, 2011 basically. strapping allows you to have one master amp. and one slave amp that follows the master Quote under construction I hate People with crappy primered cars rolling on hubcaps that are louder then me. u hate c-fizzy?
pittross Posted January 30, 2011 Author Report Posted January 30, 2011 basically. strapping allows you to have one master amp. and one slave amp that follows the master so let me get this rite wen u strapp 2 amps together you just set 1 amp and other 1 follow's Quote
C-Fizzy Posted January 30, 2011 Report Posted January 30, 2011 yep. say you strap two AQ3500's. each amp is stable at 1 ohm, so strapped, they are stable at 2 ohm. and when you set 1 amp, the second amp will follow whatever the first one does. AS LONG AS YOU SET THEM MASTER/SLAVE. Quote under construction I hate People with crappy primered cars rolling on hubcaps that are louder then me. u hate c-fizzy?
uhoh_45 Posted January 30, 2011 Report Posted January 30, 2011 (edited) by strapping your amps you can do 4 amps per one sub - hell you could do 8 amps per sub with quad coils **edit didnt proof read Edited January 30, 2011 by uhoh_45 Quote R.I.P! (Nov-29-2009) 92 explorer - 4 Atomic Apxx 15s duel .7s - 4rth order bandpass wall -4 powerbass XA-3000D's - 16 8volt batts wired to 16 volts - (9+/9-) runs 0gauge - 152.3 Db @ 29hz BUILD LOG current build 97 chevy lumina4 - 1 Atomic Apx 18 - 6 cube slot port trunk sealed off - 1 powerbass XA-3000D - 2 optima G31s in spare tire18 1 run 1/0 lumina build log
STEvil Posted January 30, 2011 Report Posted January 30, 2011 Quad coil could do 8 amps. Pair per coil. Quote MickyMcD - "Capable of making some serious trouser flapping volumes at where's-my-testicles frequencies, the Servo-Drives used to be fairly jaw dropping..." Any time you have have a power wire next to your frame put some rubber hosing (or cut up an innertube) around it. The wire is bound to wiggle (due to driving or flex) and the casing will eventually wear through. Hammerdown... 1% no links to outside websites, business related FB/YT pages allowed.
jbondox Posted January 30, 2011 Report Posted January 30, 2011 more power.... seriously, were the posts above for real? Quote SMD SuperSeller VerifiedJbondoXJames Shields
Dj_Scarface Posted January 30, 2011 Report Posted January 30, 2011 (edited) far as what I know: strapping = more power & less time tuning amps trying to get the to match out put two 3500 wat amps strapped together = one 7000 amp I could be wrong (if i am tell me!!!!) Edited January 30, 2011 by Dj_Scarface Quote Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/
Dj_Scarface Posted January 30, 2011 Report Posted January 30, 2011 You right, ease of tuning. thanks Quote Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.