Jump to content

Custom Subwoofer Now For Sale..pg 4


Recommended Posts

Posted

I have had a few different motors laying around in my garage, some frames, I have bunch of spiders, and a few cones, but I decided to piece up a woofer that will play loud, long, and hard.

So I ordered up a really tough coil, 18.5 gauge windings, 1.7ww, vented former, flat wind alum, dvc 2ohm 8 layer coil. Ordered some spiders, and cones, and have some other stuff on the way for some other builds.

Basically, I will also be doing local reconing, OEM sub modifying, home and car audio.

Completely re engineer ground up, or just simple repairs.

Anyways, this is my first woofer build in a line of recones. I just figured I would show my process.

Posted Image

Posted Image

Posted Image

Got a motor triple slug, 225oz mag, 0.5" top plate, vented and bumped back plate

Posted Image

The coil, this is monster

Posted Image

The new frame attached to the motor, getting ready for a dry build, so I can make any changes before I start gluing

Posted Image

Painting the frame to match the motor, both Rhino lined- stuff looks great in person, don't let the glare fool you.

Posted Image

This motor has been sitting around for awhile, so cleaning, dusting and inspecting is very crucial

Voice coil gap is about 0.215" so that left me with just barely enough gap between coil, and top plate, VERY TIGHT- 0.015"- 0.025" between pole piece and voice coil.

Have to set the height, make sure the coil is directly in the middle of the top plate, or the moving assembly will not move linear

Posted Image

Posted Image

basic dry build, every thing looking good

Talk about EXTREME Leads!- stiched, and threads glued in place with rubber based glue

Posted Image

More to come tomorrow

Posted Image

sundown.jpg
I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy.
Posted

Looking great mate. I love how you're explaining what's going on in each pic. Good build up :)

 

36CFDEF1-F93D-4FA3-9934-64EE2EC94080-2856-0000071FCFA47672.png.ebe82e417eabc5f239a4adf293b099f9.png

Previous 150+ daily rides:

Volvo 240 wagon 2 x DD Audio 9915s walled, Isuzu Trooper 6 x DD Audio 3515s walled clamshell, Lexus LX470  2 x Kicked Solo X 18s, Lexus LS400 4  x American Bass HD18 walled

SMD - System of The Month August 2008

My Youtube Videos

Posted

Yeah, actually assembling a speaker, and reconing, there are a few differences. This one Iam even going to space the frame away from the motor structure 0.5" so I don't have to cut the former, just so I can use this really cool inverted Dome. I also have to make a custom tooled spider spacer/clamp ring, that will be really cool.

sundown.jpg
I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy.
Posted

Dam your hand looks like a "miny me hand' that coil looks dam huge...... Very nice so far..

2007 Great Wall So Cool

4-12' RE audio MX's

Stetsom 7k2D

6-Batts

3-Mechman 250 amp Rhino's

Posted

Its hella foggy, and pretty damn cold outside, so before I start making the spider clamp, I will wait for the fog to burn off, and get some light outside

Its literally 1 block visibility out there

I just drove the girls to school, and I was driving like 15mph because I couldn't see more than 100ft in front of me if that!!!

sundown.jpg
I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy.
Posted

lookin good bro.

what kinda enclosure you intending to put this beast in?

Daily Driver 1999 Kia Sephia

Kenwood DNX-893s
Audison Bit One Processor
2 Dat 4.125's
Sundown Audio SCV-6k
Hertz hsk-165xl's Mids running active                                                                                                                                                                                                                                                                               Focal V30 Series Tweeters running active 
Sundown Sa-8 v1's in the doors
2 Sundown Zv5 12's 
Lots of Hushmat
Big 3+ and 3 + & 3- runs of Trystar 2/0
2 Dc Power Engineering 320 HP Alts

2017 Comp Vehicle
2006 Toyota 4 Runner
Kenwood Excelon DNX-893s                                                                                                                                                                                                                                                                                         Audison Bit One HD DSP
4 Sundown Sa 6.5v2 Component Sets 
Focal Access 6.5 2 ways
Sundown Audio Sax-50.4                                                                                                                                                                                                                                                                                       Sundown Audio Sax-100.4
2 Dc Power 370xp
Northstar agm27f
Northstar agm65
2 Northstar asmagm 480's
2 Dual 1 Sundown Nightshade v3 12's
2 Sundown SCV-7500's
All SMD Fuse Holders
Shitload Of Sundown 1/0

120 sq ft Second Skin Damp Pro

No, Its Not A Burp Truck!!!!

2016 Season 3rd place in Xtreme 1 At Finals

2016 Season 6th Place In Kaos 1 At Finals ( Blew The Subs Up In First Round Eliminations)

2 Kansas State Records Set In 2016 In Xtreme 1 And Kaos 1 In Midwest SPL

2-1.jpgsa.jpg
DCPowerLogoTransparent2.png

David said:

audio is a lifestyle, not a hobby

newls1
I cant read a tape to save my life... 1/2's are ok, but other marks confuse me
kingsuv
only men who cant read a tape, take it in the ass
kingsuv
you sir, get a pink hard hat on jobsites

Posted

not to sure, I will throw it in my t-line bandpass, see how it sounds, I'am sure it will sound great with that box

sundown.jpg
I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy.
Posted

i dont know anything bout building a subwoofer but it looks nice.

REST IN PARADISE BIG RICH (Sqmonte) never forgotten

Why do you guys ALWAYS dispute on NUMBERS?????

It's such a played out argument, so fucking annoying....

It's 12 fuckin 15's.... It's louder than you... Shut the fuck up...

/Rant

:)

I'm so jealous, it makes me want to club baby seals. That shit gets down HARD!

dont buy from knowledge he will scam you.

http://www.stevemeadedesigns.com/board/topic/30995-official-knowledge-feedback/

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 4675 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...