Leaderboard

Ok so the following designs are pretty basic to start with. I really didn't want anything too crazy, just a clean design with a high quality product. I am starting out this month with 2 designs. The SMD "Got SPL" head and the "Got SQ" head. I have some more fun designs in mind and as soon as i am happy with them, i will release a new one at least once a month. I want to have a wide range of shirts, designs and colors to choose from but i have to start out small. We are doing everything IN HOUSE so it takes a little bit of practice to get this just right. Anyhow, the sweatshirts....let me tell you, you will NOT be dissapointed if you buy one of these. The pullover is available with or without a logo on back. I will offer it with several different logo's as time goes but right now it's either with or without. Here is a link where these products can be purchased: http://www.wccaraudio.com/more/apparel.html Here is a few pictures. If you don't like the current logo, hang tight i have more on the way! Also, if you purchase a shirt, hat or sweatshirt and want your name on it, just email me ahead of time and i will do that for FREE!

So I got stranded at my buddies junk yard because my flex plate has been shot for years, and whenever it stops in the spot with no teeth I grabbed the 5/8 socket and ratchet and cranked over the motor a little bit by hand to get it to a good spot on the fly wheel so the starter can spin the engine over. Now the bolt Ive been turning for the past few years is starting to round off on the head (since august 2nd of 2011 when i noticed the problem). So I ended up getting quotes on replacing that whole ordeal and had to tow my truck since I couldnt get it to start again. That cost $500, plus they said the starter was shot. Luckily I still had the receipt from the last starter and got a new free duracrap starter for them to put on since it had a limited lifetime warranty. Finally got around to putting in the Rockford Fosgate 3SIXTY.2 that Mr. Meade sent me to play with. Then this white shit decided to fall.... Picked up a couple new parts from my buddies junkyard today as well from stuff that is already breaking Just a little bit of testing that I have done thus far. Which none of can be anything official to go off of since it was all done in cold weather, the woofers didnt have much play time and super stiff, the wall is not sealed off, and there are no trim panels, as well the front port is not final and just playing with different sizes. So for all I know the score could go down in summer, or up once everything is said and done. Its over a 150db so Im happy, numbers dont mean to much to me since I dont compete anymore, and probably wont unless I drive outta state to a larger show or something. sealed on the dash (db drag rules). Outlaw (usaci rules, mic in kick panel driver door open).

I would ship to AK and HI for a flat $15 charge, no matter the increase on my end to help you out..

Already said it, but dat grey zip up...

Added some more red lights...it gained 10fps

YES I KNOW THE EDGES ON THE ACRYLIC ARE ROUGH, I PLAN ON FLAME POLISHING THAT BEFORE THIS IS DONE. THANKS!