WCA Rusty

Nice vids , pretty good flex ya got there

Yup, just order a Lv5 recone with stealth coils and flat leads =]

good lookin set up, thats a decent jump in cone area =]

Chode Pimpin His Team Member of the Year jacket!!!

Sounds like your subs wer probly from 2008 or older if they had free floating leads, When we were doing testing on free floating leads vs sewn down leads we did get a big increase in power that leads could handel with the sewn version, thats why at the last few years we have used them on the Lv4's and up models. We make 2 diffrent version of them, round lead sewn to the positive rolls, like you see on the 4,xl and 5 and them also flat leads sewn to the negative roll you see on the Lv6. both work great, we use the flat on the 6 just because it uses 16 input leads and well, that would be a little on the hard side with the round leads sewn to the top. Burnt leads are exactly that, they get over heated, work hardened and break. Leads dont burn themselfs up as they can not create heat on there own. its whatever that being fed through them that induces the heat. But get yourself a set of the 2011 recones with the stealth coils, they will out perform your current soft parts.

most likley either 4 18s or 6 15s, I will try both and see what one I like better

So today I cleaned out the rear, tossed in some batts, threw copper buss bars on them. wired up the trusty Zapco 9.0 and podium, tomorrow I should have it finished and be able to start the sealed section for the subs. I will do just a single 12 off the 9.0 for some testing, then I will start the boxes for whats really going in =].

Looks good man

Now thats some foam =]

I thought the same thing so i dident watch just in case it went really bad

yup, thats next on the list =]

Finally!! Its ALIVE!!!

This is Christopher, I can work on the price, do you have a Washington address?

ya still on the same timeline =[

Boiler can crush his windshield on command, sik build

Great Job man, Thats a huge number, even more so being at the headrest!!

Thanks everyone, Just happen to be one of those lucky people that gets to do what he loves as a job

Through them in .8 each and if needed you can always shrik the box a tad if needed. heres 300 watts in a .9 box with a 4 inch port

got some hatch flex, looks nice

That's not mine, it's a guys on the east coast.

Click pic for vid and enjoy =] This is from TNE Finals

no but really Im beat man, hit me up tomorrow. Im off to catch some zzzz's unless its a matter of life and death, then I will call

too much got me like

Stalker ..... hahahahah i kid I kid