Btrash

I will stick with my Samsung Instinct... best phone I have owned.

Nice! Looks like it was shorting on something probably. Yeah, some crap boards have the components way too close to the inner rim of the holes for the risers, so they need those little cardboard thingys, or electrical tape in your case :-D KILLER framerates in CS btw.

wtf... do they only listen to music outside their cars? what is with these ghetto walls in the back of trucks on these related videos?

check the mounting posts to make sure they aren't hitting anything they shouldn't on the mobo... Could be the new mobo has fewer holes for these standoffs, so one is touching the actual board. Some even need the little carboard spacers on crappier boards. Try turning it on with the mobo out of the case to see if that is the issue.

http://www-odi.nhtsa.dot.gov/recalls/recallsearch.cfm Recall search http://www-odi.nhtsa.dot.gov/cars/problems/tsb/tsbsearch.cfm Technical Service Bulletin search

reminds me of this: http://www.tubearoo.com/articles/90088/Bab..._Subwoofer.html

If the cd-rom drives don't turn on with the power on, I would suspect a bad power supply.

I hope its not THHHHHATTTT slow :-P I know, I know you meant ghz Also, I heard those celerons are overclocking beasts. Should be able to juice her up pretty nicely.

I'm liking those white LED fans better than the blue. That 9800 is a beast!!! Nice purchases.

Saw this on the highway on the way to work the other day. Dunno WTF it is..... Redneck dumptruck or ghetto pickup truck?

make sure all computers are set to automatically obtain IP address. make sure the router is set to DHCP. Unplug the power to the modem and router, wait a few seconds and plug the modem in first, then the router. Do a "ipconfig /renew" on all the computers (go to start->run and type CMD, then type ipconfig /renew)

From what I have heard, it doesn't cool it all that much. Maybe slightly less than room temp.

Yeah that router, or any other router like it will work fine. No need for a super expensive router. Your router or PC may just not have the settings correct for ethernet, which could be an easy fix, but hard to figure out if you are without internet at the times that you are trying to get the settings right, so I wouldn't be able to help you very easily, but if I was there I could probably do it in a minute or two, so you might just be better off getting that adapter, or if you know anybody that is has a bit of computer or networking know how, have them take a look at it for you. I fix peoples stuff all the time for a beer or whatnot.

You would not have to mess with any settings in your modem to currently use ethernet rather than usb.

That I am not entirely sure of. If you have a ethernet port, you should use it. USB will be limiting the network speeds.

It is gonna be tough to find a wireless router that uses usb, like yours does, instead of ethernet. I would buy a normal wireless router w/4 port switch , and also a PCI ethernet card for your desktop.

Just read the whole thing. TONNNNNNNNNNNNNNS of respect for your wife. She sounds like a great mother, and I appreciate that she speaks her mind.

+1 Great for if you need small quantities of nails/screws/any other hardware.

Well I guess you are just going to have to chop off the outside edges of your seat then :-D

what about making the bottom row have 3 that are farther apart, then have 3 in the 2nd row that will be able to sit lower in the spaces between the 2nd row, and have 2 in between those in the top row.

Redo the baffle and stagger the top row

also do you have any cordless phones near the router that are on the same freq. as the router? or between the router and the PC? Example a 2.4 ghz router and a 2.4 ghz phone. This was the case for me, and anytime the phone was answered, it knocked out any wireless connections to the router. I have also heard the same being true for microwaves.... but I doubt you have your router near one. Also alot of internal wireless cards have shitty antennas, so it might just be that it can't see the router at certain times. You might need to get an pcmcia wireless card. My fiance was in a similar boat. Got bad and/or crappy signal with her internal card, but with a pcmcia card, gets 3-4 bars of signal in the same spot.

What type of router and network card do you have? model/brand/ wireless b/g ?

I thought this one was crazy: http://www.liveleak.com/view?i=86a_1181938978 Imagine seeing that coming behind you in a tunnel.