z71kris

those still great to watch, I love those, I spent about finding those a few months ago..

coolness!

that cracks me up to read!

that should set her up nicely! I dont know anything about the monsoon system..

thats awesome, hes a little weird thou, I have heard him on radio shows and he is just different, but I love his act!

thats cool as hell!

nice stuff there...get the power cord when you can...

nice!

I think the first one, the O gets lost in the second one, its clever and looks good, but it just gets lost to me..

I see, at least I know I now have enough power for the 2 15's

good to know....that would have been not good, I have always assumed that it was each VC the power rating was stating not a combined....

a little wrist control

doesn't each VC need the 500?

No its a mono block, so I mean strapping, sorry I did not really know the term until after I posted this. Sorry the model is a HTG2600D My math came up with about 1300 wts rms as well, so by me having 2 500wt rms DVC subs, I need about another 700 wts, so I need to get another amp, or buy a 2k rms amp..thanks for making sure I was thinking the right way with my numbers..

try this thread

that always makes me laugh

thats awesome!

stupid song but funny as hell and dirty as hell!

pics?

Damn!

There are a couple of ways of trying to run it like you are thinking, well really one, you would have to make sure you cut the door speakers wires out of the harness, and then tie your amp wires into those wires for the door speakers so the only signal would be coming from the amp and not from the amp and HU, if you did that you would be ok, but it would be best for you to run the wires from the amp to the speakers in the door, you will have to pull away the carpeting and trim panels around the door to get to be able to see your grommet or rubber boot, and then fight the wires through there, metal close hanger and electrical tape works well for me when snaking wires. Hope that helps and not confuses..

Hello, I'm still kinda new here, so I am going to have some questions along the way, this one might be a dozey for ya'll, how do I find my amp effeminacy rating. These are the facts that I know about my amp, Lanzar Digital Mono Block Amp 1 x 400W RMS @ 4 OHMS 1 x 800W RMS @ 2 OHMS 1 x 1000W RMS @ 1.3 OHMS 1 x 2000W @ 1.3 OHMS 1 x 4000W Bridged Max Power @ 2 OHMS Mono Block Subwoofer Amplifier 1 Ohm Stable MOSFET Power Supply PWM(Pulse-Width-Modulated) System Glass Epoxy PCB With SMD Technology Gold plated RCA Inputs Custom Terminal Block for Speaker Connections Thermal, Overload Short Protection Variable Subsonic Filter(15Hz~40Hz,24dB/Octave) Phase Control 0-180 degree Input Impedance:10K Ohms Soft Turn On/Off Heavy Duty Power Coated Heatsink THD: 0.1% S/N RATIO: 90dB Input Sensitivity: 200mv~8V Freq. Response: 10Hz~150KHz Remote Bass Control Fuse: 30A x 4 I need a little help figuring the numbers, I am running it at 1 Ohm, and should be around 1300 wts. Any help would be appreciated! I guess I want to know so I have a better idea what the numbers going to my subs are, to deceied to upgrade to another another amp, or bridge this one with another.

Both good suggestions!