It is easiest to think of the power handling of component sets as power handling PER crossover. So if it says 100 watts RMS, then that is per crossover (or per door if you want to think of it that way). In a lot of the component sets I have seen, the RMS of the individual speakers is higher than the RMS of the tweet and woofer together. I think this has more to do with the power handling capability of the actual crossover itself.
In your case, the RMS of the components is 60 watts RMS, this is pretty much exactly what the T400.4 puts out to each channel. The match is perfect. The 6x9s have a bit of a higher RMS capability, but they will be in the rear so you it is fine to have a bit less power going to them. You sure aren't going to hurt them by under powering them. I only mentioned the T400.4 because you mentioned the T1000.1 for a sub amp and both of those amps cosmetically match up. There are plenty of nice 4 channel amps out that will run your choices of speakers just fine. Any amp with a 4ohm rating of 60-100 watts RMS per channel is all you need.