Watch the bass

What's wrong with mixing brands? (outta curiosity from your perspective) Don´t mix AGM with wet cell´s, Mixing AGM´s with AGM´s is not this worth.

The wrappingwork form the box, half of forum noob´s do a cleaner job on there first.

Hot and wet!!!

Here the build of the sealed lvl 3, look that they have small space also http://www.stevemeadedesigns.com/board/topic/157802-dc-69-camaro/

Loganberry builded a sealed box for 2 lvl 3 and stated that they sound very good.

If you had read the first site, you would know the answer.

Shoot CJ18 a mail.

http://www.stevemeadedesigns.com/board/topic/137758-smd-audio-tools-map/

Or you sell your T1000 buy a T 2500 and use the audio-tool´s map, find there someone near and set your gain´s proper. http://www.stevemeadedesigns.com/board/topic/137758-smd-audio-tools-map/

Did you asked Bladice for a shippingquote? The 115 GBP are 132,40 € maby you stay cheaper if you buy from them. http://www.bladeice.com/index.php/products/smd-dd-1

Bladeice is my only information too, but maby it´s cheaper to direct import them SE ship´s world wide, but don´t forget that you have "maby" to pay sale taxes. In Germany we have to pay 19 % Saletax on item and shipping if both over 32 €. Link to SE Ebay shop http://www.ebay.de/itm/SMD-DD-1-dd1-Distortion-Detector-Analyzer-by-Steve-Meade-Designs-/360608737564?pt=LH_DefaultDomain_0&hash=item53f5f4a91c

I think it´s a failure, that someone forget to drop or lift the price. Normal @ work, ask SE and im sure you get the lower price. I found a vew failure´s on Ebay for example, that the titel offer´s a 2 K amp with a price near the model smaller and the discription of the item was for the smaller model. I mailed them and the failure was the discription for the smaller model, not the titel and not the nice price.

I guess you to go with the SA 8 sub´s, The E 8 v 3 is a 300 watt RMS sub the SA 8 are a 500 watt RMS. You have a 2.2 K amp it´s not recommanded to overpower sub´s. Sundownsub´s are known to take a beating sometimes twice than they rate, gains set with an O-scope or DD-1. Obviously losses with imprise and so on, i would go with the SA 8´s they matching better to the power of your amp.

Where did that come from? I said in my last post that only the d5100r would fit because of the reverse terminals needed. That's the only option I have for under the hood with Xs power unless I alter all of my cables which I'm not doing. The only thing I'm concerned about at this point is finding adequate battery bank to hold a good voltage for at least a demo full tilt. Obviously I'd need like 3 d3100's to support 5k full tilt for long extended periods with only 200 amps to charge it. But I'm looking for enough to get me through a demo (45-60 sec full tilt on music) and then let it charge back up... Rinse and repeat. Remember this is only 2 batteries in the trunk, and weight is my limiting factor. So I'm trying to get enough electrical for the least weight. I'm not saying I want to put a xp950 and hope it supports 5k which is what some people think I'm saying. Example would be like 2 d2400's 2 xp2500's 2 d2700's Or Any other combinations. If you can only place the 5100 under the hood than go with the 5100, in your first post you say you wannt to go with group 24 batt´s. In the trunk you can place XP series, that´s wgat they are build for. Choose the batt´s for the trunk from the price. Here a vid what 500 amp´s do to the big boy´s.

If you want to replace your batt under the hood, choose a D2400 for under the hood, the XP series have no heatprotection, so no use for under the hood.

Sure i didn´t say that they cant take overpowering, or doing the right math with the losses in boxrise.

I call the SD 2 is 500 watt RMS rate http://sundownaudio.com/index.php/products/subwoofers/item/sd-series.html?category_id=2.

For 1, 1 D 3100, for 2 2 D3100 or 1 D7500 minimum, better 3 D3100 or more.

that is terrible! he deserves a long painful stay in hell Rambo 1

Yor 2 set´s for front and rear, or only front?

How often did whe have ,the theme bitching about these or that on SMD? Isn´t it more that bitching is a thing in itself, out of the beeing of the oldes´t buissnes in the world? Maby someone will create a thread about bitching/acting in itself. But normaly bitching about "that" is a action of a bad suitor, a antagonist of bitchbuissnes, of a unnaware fellow runner of one of this sites. It´s every time these 3 bitch relators and there past and there future and there now, like the buissnes is "the oldest of the world". I asume for the SMD-forum, absolut the most people there bitching here are in group 3 from the sentences before and there respect to te respect of unnaware fellow runningship. Cheer´s.

1 http://www.stevemeadedesigns.com/board/topic/160084-1005-lb-battery-with-free-shipping/

http://purplesyrup Dear hangover, It has been great spending so much time with you today, But its really time for you to go back where you came from. Your starting to be to "clingy" and I really just need some space. Its not that I don't want to spend time with you, i'll probably see you again in a week or two. But for right now, its time for you to go. I've called you a cab and your things are all packed up waiting on the front porch. Jan 31 2013 06:57 AM