Socky

Good thing i read this before i started browsing the forum.

tipically deadner usually lowers it, if so, might as well deadner the whole area but it may only drop like 5hz tops.

Take the system out, problem solved, no more mirror issues I would advise to take it off before it rips a chunk of glass out and causes more problems.

alpine always suggest to never use 45s, they decrease the score, but can help in some cases.

i would used the battery post before i run off the stock fuse box.

Seems pretty high for resting voltage, load test it, make sure it passes. Might be overcharged. Sounds like you have a faulty regulator.

45s have shown to hurt people in scores. It will save wood if the port shares a wall. Have you look into trying torres box calculator in the enclosure section?

Why are you giving your secrets out. No need, this is a car audio forum keep that to yourself. Just keep that in mind when you get a bad "pimple" LOLOLOL im a few states away from you no worries

Why are you giving your secrets out. No need, this is a car audio forum keep that to yourself.

looks like you need a little more power teardrop. You think two of these would handle a apsm 1500.1 in a 6 cube box, tuned roughly 28-31 hz

Running two 4 ohm speakers in series brings the ohm load into 8 ohms, then parrel them to a 8 ohm speaker would bring to a final load to 4 ohms. Might want to invest in a dmm if you do not already have one, and find the real world ohm load of the speaker, to get a more accurate reading.

Well today was my first day at work. Everyone was surprised i came with proper tools and everything. Couple of the people asked me since i had nice things if i was rich. I laughed hard, and i was like no, i payed for all of my things with hard work and effort. I currently have more tools than couple of them on the first day. Man it was it hell, from 7 am to 4pm all i was doing was ripping out old tile, redoing a 1500sq ft of tile. None stop of hammering, and man i never used a hammer as much as i did today, right and left arm are numb from it. House i was working in was 4 stories, and had a elevator. They already built a 30k bar for them outside. Man this work is so much better than a grocery store. I do get covered on insurance for work and stuff like that.

he is a member on here.

ive seen people use drills, now thats just something even funnier lol. I went from power to manual, funny lol.

finshed? who invented that word, none of us are ever finished. We just keep putting 15lb of shit into a 5lb bag, then try to make 20lbs fit into a 5lb bag lol.

I would go with the 3 8s more cone area and more motor force

Thought the burnout was cool, but doing it in a cemetery, people are their to rest in peace, not no tire burning, think he could have done it in a different place.

Bad ground loose somewhere.

45s are show to hurt peoples score, if you are building a box just for music, 45s are not necessary, but you want the box as strong as possible, and signs of flex so loss of pressure= loss in output.

When using the knob, set the knob at full volume and adjust the gain from the amp until it starts to distort.

lol..

song drops way to low for your enclosure, if you keep playing below your tuning eventually the sub will be way to soft for lower end music, plus you are overpowering it, be smart on what music you listen to.