uhoh_45

but i see where he's coming from now he's talking resin 45s in the corner it just seals box i was talking wood 45s in the corners

my buddy did that in hist justy haha to keep the gas fumes out as well as team riprock does that to keep the inside of there extreme vehicle at a certain temp as for cold in subs many things if its a cheap plastic coned sub they crack very easy in winter if you bump and get your sub nice n toasty n go inside over night come out your sub could be frozen from the condensation freezing up so you could f with it there just let your car warm up before beating on subs as for deck cant help ya been wondering myself

soooooooooooo lemme get this straight by adding 2 corners and making 4 glue/screw points (per 45'd corner) it makes the box weaker? and not brace it making it stronger? is that what your telling us... the internet

45's aren't bracing.. haha joo dumb are you talking to me or the other guy yes you 45's aren't bracing.. haha joo dumb are you talking to me or the other guy If he was talking to the other guy, he would of just quoted him, and not you. correct- but in this case I'm multi-quoting to prove your point haha

45's aren't bracing.. haha joo dumb

it actually was rather helpful and i yeah i had a 2 way setup in my explorer with no crossovers, dedicated amps and my memphis 3way when i do get serious bout this i will look to you for more detailed help and recommendations once again thank you Kimo.

i couldn't stop watching but music gave me a headache

can anyone enhance the lows in this song? or do anything with this song

you can get 2 of those powerbass 4000s for same price as one saz4500 haha

wheres best place to get the flares

how can this happen i have a positive current coming from the left (battery) and say i fuse it 12" within the battery i still have a positive current coming from the right (alt) because i have my stock wiring in place as well as my alternator is STILL PUTTING OUT CURRENT so if anything does happen that fuse blows, both wires are still live in order to prevent that you would need to fuse it on both the alt side and the battery side

i'd get 4 SDC2.515's

more then this 18 runs total

That with that

holy shit i forgot this thread was still around as for build log turns out i cant weld the cart to the bike with the welder i have at the moment im going to try finding a Donor bike or see if i can borrow a tig welder haha as for handle bars i plan on extending them to the seat i plan on making a nice chopper/cruiser haha to just drive around my area

no one likes you kranny thats why jk bro haha whats a dmm though :noob: :noob: :noob:

if your bored, clean your room

looking good don... hope on seein er next summer

there the size of my avatar on the side <<<<<<< and i dont know how to do that haha

pictures are WAY TO SMALL :angry:

you could have a a huge trunk but have a small opening making it hard to get a big box in there you may have to build inside the trunk i recently built a box for a customer and didnt think bout that when designing box and ended up having to cut the port off and using aeros to get the box to fit but OP measure trunk opening if you have arms on the side of trunk that hold it up measure in between them, assuming you have those you'll have those bars to take the weight off the trunk and make it easier to lift.... measure the height of that while the trunks closed other then that just measure your max dimensions that will allow you fit the box in vehicle

not as simple

make your port taller like 3" or so