Jump to content

412 CVX

Deleted
 View Profile  See their activity

  • Posts

    3913

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by 412 CVX

  1. 412 CVX
    maybe later. i don't usually do charity work. but i'd probably do something similar to the box i posted earlier for the platform 3 PSI 18
  2. 412 CVX
    well keep it the same width, but in the process you shorten the two bends... it's difficult to explain but basically you just have to measure down the middle of the port and cut off the width until you get the right total port length. there's a method i use so it's not so guess and check but i can't really explain it.
  3. 412 CVX
    Personally, i'd add a third bend so that the port and the sub aren't facing opposite directions.. like this but minus one bend
  4. 412 CVX
    Stop pulling stuff out of your ass, Joe. First off, as long as you cut out the port right and sand it if needed, there will be NO problems doing the port like that. Second, there are plenty of exceptions to that. in some trucks subs up, port to the side works best, in most SUV's subs up port back works best, and in some trunks, subs forward port firing to the side works best.
  5. 412 CVX
    like I did in this box.
  6. 412 CVX
    you should probably start shopping here instead.
  7. 412 CVX
    do the baffles differently please...
  8. 412 CVX
    Lol i was thinking the same thing
  9. 412 CVX
    I've done a handful of 4th order designs. it's hard to tell how well they work until you get them in your car.
  10. 412 CVX
    What brand HU do you have? i have an alpine and i had to turn my sub level to + 15
  11. 412 CVX
    because you're awesome.
  12. 412 CVX
    Like i said earlier, Model it in sketchup and be sure.
  13. 412 CVX
    <------ Wants vids. if i can't fit an 18 in my trunk, then i'm definitely going to get a pair of these 12's
  14. 412 CVX
    okay 16 high, 32 wide, 21.5 deep. port is 13.75 high, 3.75 wide, 30 length. (22.5 physical port length) exactly 3.5 volume tuned to 33.75 .08 bracing accounted for. double baffle included all the walls will be 13.5 high
  15. 412 CVX
    here give me a sec.. i'll give you a proper design first.
  16. 412 CVX
    well then you need to make the box smaller lol. keep about 15-16 inches per cube rather than 20.
  17. 412 CVX
    I'd ignore that and just model it in sketchup. you can figure it out for sure that way.
  18. 412 CVX
    too much port area. port needs to be .75 shorter.
  19. 412 CVX
    Why is the port facing the rear? you've basically got a wall.
  20. 412 CVX
    Welding cable is nice. it's universally sized vs. certain wire brands so it always fits nicely into the connectors. basically it's just like any other power and ground wire. i won't get into a brand war here, but it seems to be a hell of a lot cheaper than some other stuff. electricity will always take the path of the least resistance. i'd personally use all OFC or all CCA if i was gonna do a build. i'd probably use OFC though lol
  21. 412 CVX
    You have too much port area. that's the problem. with 15-16 per cube, you should have a port length somewhere in the 30-35" range
  22. 412 CVX
    BAHAHAH!!
  23. 412 CVX
    2? you probably should have mentioned that in your first post.
  24. 412 CVX
    Torres calculator.
  25. 412 CVX
    for two 12s?? single 6 or 2 4's should do. 2 6's is too much more than likely
×
×
  • Create New...