aznboi3644

"900 watts" @ 25%THD = SQ FAIL

learn how to use HornResp and you can model any chambered t-line or any type of horn you want.

is there a particular reason you want a aluminum or metal port?? There is no difference in sound.

I want one 15" 12 spoke basket...PM shipping to 47715

they are around 400 watts rms maybe a little more. For 50 bones a sub I would jump on that. Power them with around 1500 watts between them and they should bang hella good for 200 bucks of subwoofer.

yeah...free air is no baffle...speaker in the air with nothing around it.

big three?? I did the big 6 on my truck

actually below tuning not all of the sound is coming from the port....the only time most of the sound emanates from the port is right around the tuning frequency.

deck all the way up eh?? yeah thats the reason why...clipped signal durr

I'd say quite trying to save yourself...your statement about 90 degrees has nothing to do with limits and curves...its a 90 bend whether its a curve or a 45. doesn't matter. you obviously have no idea what you are talking about.

reread your original question genius...using a 45 in the corner of a right angle port is 90 degrees. You make no sense.

The woofers would not have the same parameters...its simple if they did than they would be the exact same subwoofer

I have no 45's in my 33hz 1/4 wave resonator yet its loud as hell. 45s would probably make it a little louder and smoother response but it sounds fine as is.

If you want more info do research on Helmholtz Resonators http://www.phys.unsw.edu.au/jw/Helmholtz.html

45s go into 90 degree corners.

i have a single 15 Pr in 4.3 cubes net ported at 40Hz...pounds HARD. Handles 500 watts like a champ too

the AQ and DD can be tossed out the window...Mojo's sound like crap sealed too.

I doubt anyone can recone it...only way is like JL and send it in

bashing?? haha wow. its called an opinion...what the OP asked...durr

Quality of the P1's suck balls. Thats my opinion. I'd get Alpine Type E's before RF

That is why there is HornResp to model tapped horns, rear loading horns, and other horns. Throwing together a tapped horn and guessing the compression ratio and expansion rates whether its conical taper or exponential taper usually ends in crappy results.

its case dependent. In my truck the sound sounds A LOT better and louder the with sub 180 out of phase with the speakers. With the sub in phase the output drops by atleast 4db I have no idea why though.

I would rather have a Tapped horn in the closet

There are people that give 1508s 1000 watts rms all day without any problems

just tell him if his theory is right than if you placed a piece of wood into a vacuum and another piece exactly the same in a chamber with pure oxygen in it the wood in the oxygen would be stronger?