CJ18 Posted April 3, 2011 Report Posted April 3, 2011 Simple answer is that unless you are looking for rebuts of DBS invert that Sucker and show it off. An to whoever you are (purfectlyinsane) if you want respect here then prove to us who you are and what you know. Show off your work and you will get respect for your knowledge but coming in and bashing very knowledgable peoples posts won't last long here Quote
MrSkippyJ Posted April 3, 2011 Report Posted April 3, 2011 Oh ya thats right what do i know..... i concede this discussion to you good sir. i truly thought there wasn't a difference though! Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
sqsux Posted April 3, 2011 Report Posted April 3, 2011 every test I've seen decibels were lost when sub was inverted. I'd be careful with what you use to mount that with and how you mount it, that 100 or so pound motor wont be very nice to those screws if you mount it vertically and inverted. Quote Start out boxy, shape as you move along. Dc Audio Team Fur
MrSkippyJ Posted April 3, 2011 Report Posted April 3, 2011 every test I've seen decibels were lost when sub was inverted. I'd be careful with what you use to mount that with and how you mount it, that 100 or so pound motor wont be very nice to those screws if you mount it vertically and inverted. how is vertically inverted any different than vertically regular as far as the mounting goes? Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
bassahaulic Posted April 3, 2011 Report Posted April 3, 2011 Pretty sure he owns one of the loudest vehicles in the world... Jus sayin. Danny Hays "Owns" the loudest db Drive vehicle on the planet. But he wouldn't know how to wire the subs to the amps. lol Quote
sqsux Posted April 3, 2011 Report Posted April 3, 2011 every test I've seen decibels were lost when sub was inverted. I'd be careful with what you use to mount that with and how you mount it, that 100 or so pound motor wont be very nice to those screws if you mount it vertically and inverted. how is vertically inverted any different than vertically regular as far as the mounting goes? there's not 1.5 or so inches of wood to help hold it, i'm just saying out of personal experience. Quote Start out boxy, shape as you move along. Dc Audio Team Fur
MrSkippyJ Posted April 3, 2011 Report Posted April 3, 2011 every test I've seen decibels were lost when sub was inverted. I'd be careful with what you use to mount that with and how you mount it, that 100 or so pound motor wont be very nice to those screws if you mount it vertically and inverted. how is vertically inverted any different than vertically regular as far as the mounting goes? there's not 1.5 or so inches of wood to help hold it, i'm just saying out of personal experience. but it is the same amount of wood either way. Not trying to argue with you, I am just confused Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
Mr. Darkjustice Posted April 4, 2011 Report Posted April 4, 2011 every test I've seen decibels were lost when sub was inverted. I'd be careful with what you use to mount that with and how you mount it, that 100 or so pound motor wont be very nice to those screws if you mount it vertically and inverted. how is vertically inverted any different than vertically regular as far as the mounting goes? there's not 1.5 or so inches of wood to help hold it, i'm just saying out of personal experience. but it is the same amount of wood either way. Not trying to argue with you, I am just confused maybe he means it bein mounted on the box leaning in is better than on the box leaning outward Quote Fusion With A Stetsom 4k2d on 2 DC XL 15s tuned to 31hz and Subs and ports forward The Revolution Was Not Televised But There Is This Thread(clicky) Dr Merkenstein is my 360 gamertag and my profession. When shit gets real, call in the Doc
PurfectlyInsane Posted April 4, 2011 Report Posted April 4, 2011 Simple answer is that unless you are looking for rebuts of DBS invert that Sucker and show it off. An to whoever you are (purfectlyinsane) if you want respect here then prove to us who you are and what you know. Show off your work and you will get respect for your knowledge but coming in and bashing very knowledgable peoples posts won't last long here I have not bashed a single person. Really? Seriously dude, do you have a problem with somebody who actually likes to post truthful info? Also, I do not have to prove anything about myself. If I was famous that wouldn't make me know anymore than if I wasn't. And why do I need to show off anything? I'm not here preaching one product is better, or the way I do things are better. I'm only saying the way things are. I didn't even disagree with the guy who posted there isn't a difference. Cause in theory, tere isn't. But when it comes to a install, variables come into play and the results could vary either way. So a difinte answer isn't possible. Simple as that. If I recall, bashing people is talking shit to them, calling them names and such. Please point if I have done any of that... I gave my answered, and then wanted to hear how he got his. Giving a simple answer without telling why you got that answer isn't helping anybody learn. If you don't know how something works, you really shouldn't give out information, for the most part. Quote
The A Team Posted April 4, 2011 Report Posted April 4, 2011 Perfectlyinsane are you saying there is no difference? I am still trying to figure out your opinion on this. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.