jreese92 Posted April 23, 2011 Author Report Posted April 23, 2011 well heres the thing, i don't know shit about wiring, and i just want to get the 2 ohm power from the amp Quote Pioneer 6300ub Rockford Prime 6.5's Pioneer 6x9's Alpine MRP-M500 10" Alpine Type R 1.4 Cubic Foot Enclosure Tuned to 34 hz Stinger 4 Gauge Wires
MrSkippyJ Posted April 24, 2011 Report Posted April 24, 2011 here's the thing, you really can't with what you have. Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
RooTxBeeR Posted April 24, 2011 Report Posted April 24, 2011 Just do whats its supposed to do and it will work fine. Quote On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5
jreese92 Posted April 24, 2011 Author Report Posted April 24, 2011 here's the thing, you really can't with what you have. Then what would i need to make it work? Quote Pioneer 6300ub Rockford Prime 6.5's Pioneer 6x9's Alpine MRP-M500 10" Alpine Type R 1.4 Cubic Foot Enclosure Tuned to 34 hz Stinger 4 Gauge Wires
MrSkippyJ Posted April 24, 2011 Report Posted April 24, 2011 Buy another set of components. Why do you want 2 ohms? Just for the power? If so don't worry about it. If it were me, and I do have the same amp and components, I would run all 4 channels to the components (bi-amp) and find something else for the by9s. Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
michigancapri92 Posted April 24, 2011 Report Posted April 24, 2011 run the 2 component speakers normal to their separate crossovers then take the 2 crossovers pos pos neg neg to amp and each speaker will still have their correct ohm loads and the amp will see a 2 ohm load, i have 4 comp sets on a 2 Chan this way no problems sounds great, you can wire speakers in series or parallel only AFTER the crossover not before Quote Teamcapri.comThe TeamCapri 1992 Mercury Capri XR22012 FORD EDGE SQ BUILDOld build logMy FeedBack1992 Mercury capri XR2 Hyper LED
michigancapri92 Posted April 24, 2011 Report Posted April 24, 2011 hard to see but thats how you would wire it the 2 crossovers to there speakers then splice both pos and both neg into on and you will see 2 ohm load Quote Teamcapri.comThe TeamCapri 1992 Mercury Capri XR22012 FORD EDGE SQ BUILDOld build logMy FeedBack1992 Mercury capri XR2 Hyper LED
jreese92 Posted April 24, 2011 Author Report Posted April 24, 2011 alright thanks guys, ill probably be askin more questions about wiring in the future Quote Pioneer 6300ub Rockford Prime 6.5's Pioneer 6x9's Alpine MRP-M500 10" Alpine Type R 1.4 Cubic Foot Enclosure Tuned to 34 hz Stinger 4 Gauge Wires
MrSkippyJ Posted April 24, 2011 Report Posted April 24, 2011 run the 2 component speakers normal to their separate crossovers then take the 2 crossovers pos pos neg neg to amp and each speaker will still have their correct ohm loads and the amp will see a 2 ohm load, i have 4 comp sets on a 2 Chan this way no problems sounds great, you can wire speakers in series or parallel only AFTER the crossover not before You can't change the ohm load after the crossover. He is buying a 4 channel amp and has 4 sets (counting components as one set) of speakers. 4 channels, 4 speakers. Unless he is willing to just not use 2 of the channels on his amp, there is nothing he can do. Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
RickyFriery97 Posted April 24, 2011 Report Posted April 24, 2011 If you want the 2 ohm power it's gunna be split between two speakers You may get more power by just running the 4 ohm power to a single speaker/componets set Quote 2014 Chevy Silverado Crewcab 1994 Chevy Full Size blazer
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.