Bakerman Posted July 15, 2011 Report Posted July 15, 2011 I have a 4 wire O2 sensor. The two white are the + and - heater wires, the black is a signal + and the grey is a signal - wire. My question is when hooking up an A/F guage, do I splice into the heater + or the signal + Quick help is appreciated guys...thanks! Quote
Bakerman Posted July 15, 2011 Author Report Posted July 15, 2011 I know this is a quick bump, but I'm under the hood workin on random shit, just wanted to see if I could get a quick answer. Quote
crispy_chick3n Posted July 15, 2011 Report Posted July 15, 2011 should be signal. heater is just a constant voltage. signal is the changing voltage that you want. Quote This page is crispy_chick3n approved. © crispy_chick3n inc
RandyAudio Posted August 10, 2011 Report Posted August 10, 2011 As crispy said you only need the signal wires. If you tap the heater wires you will never get a reading except full rich. Quote
teardrop Posted August 12, 2011 Report Posted August 12, 2011 get a wide band a/f gauge if you wanna tune with it because the low band that just plices in is just for looks they are worthless for tunning and power Quote
audiofanaticz Posted August 12, 2011 Report Posted August 12, 2011 Should be the pos signal from what I remember when I tossed one in my old 35th anniversary thunderbird supercoupe. I miss watching those lights bounce around Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.