qcbangin Posted October 3, 2011 Author Report Share Posted October 3, 2011 its's 30"W X 40"D X 19"H. Don´t know much about that trunk, can you get the maximun dimensions available? i might try to help you out, but i´m not even close to some of the great builders out there like ray or strongman designs! Quote Link to comment Share on other sites More sharing options...
fecupe2001 Posted October 3, 2011 Report Share Posted October 3, 2011 I would do something like 19" x 36" x 26" with a 17.5" x 6" port with a 25" long, that would give you around 6.4 cubic feet and 105 SQ of port with a 36 hz tuning, at least that´s similar of what i would do, i{m guessing you are gonna build the box inside the trunk right?? Quote I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/ Link to comment Share on other sites More sharing options...
qcbangin Posted October 3, 2011 Author Report Share Posted October 3, 2011 yes. it's gonna to be built in the trunk. i was wanting the sub facing up, and port back. but the last box i had in there was with 2x 15's ported in a 10cube box. it was ported into the cabin through the back seat armrest. i just don't know if i will get louder ported into cabin again, or if i should keep the port in the trunk. any thoughts? I would do something like 19" x 36" x 26" with a 17.5" x 6" port with a 25" long, that would give you around 6.4 cubic feet and 105 SQ of port with a 36 hz tuning, at least that´s similar of what i would do, i{m guessing you are gonna build the box inside the trunk right?? Quote Link to comment Share on other sites More sharing options...
LoudBimmer Posted October 3, 2011 Report Share Posted October 3, 2011 Design it yourself? Cmon it's not that hard Quote Link to comment Share on other sites More sharing options...
n8ball2013 Posted October 3, 2011 Report Share Posted October 3, 2011 im willing to bet if you made a post that said. need a design for an hdc3 18 ill pay you'd get a designer. Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
Bonacci55 Posted October 3, 2011 Report Share Posted October 3, 2011 i think ram is busy otherwise he would design one hell of a box for ya man, trust me he isnt ignoring you. Quote head-unit: pioneer avh p-4300DVD 2 Fi btl n2 18's 1 dc audio 5k 1 dc audio 175.4 4 sets of fusion CP-CM50 components 1 mechman 270 amp alt 3 XS Power D3400 80 Mil Sound Deadener by audio technix all in my 2003 chevy suburban. Link to comment Share on other sites More sharing options...
Lbox88 Posted October 3, 2011 Report Share Posted October 3, 2011 (edited) Did you also try to hit up Ram's website? Would give you a rough idea on how much it would cost. Edited October 3, 2011 by Lbox88 Quote UBL | Build Log Link to comment Share on other sites More sharing options...
qcbangin Posted October 3, 2011 Author Report Share Posted October 3, 2011 yes. i emailed him from there. Did you also try to hit up Ram's website? Would give you a rough idea on how much it would cost. Quote Link to comment Share on other sites More sharing options...
qcbangin Posted October 3, 2011 Author Report Share Posted October 3, 2011 i am willing to pay. i know a good design is going to cost, but i never in the headline that i was. thanks, i'm going to try that. im willing to bet if you made a post that said. need a design for an hdc3 18 ill pay you'd get a designer. Quote Link to comment Share on other sites More sharing options...
Dan2427 Posted October 3, 2011 Report Share Posted October 3, 2011 Bcpballer, and decaf have both designed boxes for me. I liked them you could try them too. Quote 2003 GMC Yukon Denali Alpine CDA 117 Redoing Mids/Highs 4 Runs of 1/0 Knukonceptz 2+, 2- 4 Deka 9A31's in back (Stock underhood) 250 amp Alt. AQ20K 2 18" Crossfire XS V.2's 12 cubes 33hz 149sq inches of port! Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.