CleanSierra Posted December 14, 2011 Report Posted December 14, 2011 Poor voltage will fry any equipment. You need to not be trying things without reading and learning first. Im not the one you want to try to troll. Just a fyi for you.
BassMunky Posted December 14, 2011 Author Report Posted December 14, 2011 yes , but if i run it at 1 ohm and have the gains really low wont it be okay? Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
CleanSierra Posted December 14, 2011 Report Posted December 14, 2011 You have no way of setting a gain on an amp properly without a scope or a DD-1. You have equipment that is too nice to mess up by guessing. Get it to someone that has a scope or DD-1 before you fuck something up. Im not the one you want to try to troll. Just a fyi for you.
bdog Posted December 14, 2011 Report Posted December 14, 2011 i would double check you grounds b4 replacing the amp and maybe step up to a saz-1500 would be nice. REP
BassMunky Posted December 15, 2011 Author Report Posted December 15, 2011 what would be wrong with the grounds? Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
BassMunky Posted December 15, 2011 Author Report Posted December 15, 2011 could it have been the speaker wire touching the power wire/ really close to it? Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
Bmike Posted December 15, 2011 Report Posted December 15, 2011 seriously if your thinking about buying new equipment, you just need to stop, you have already jacked your amp up or come close to it, buying another amp isnt going to correct your problem, as a few have stated go buy a dd-1 set your stuff up correctly ,do your self a favor and listen, or read up , these guys have given you good reliable answers, and most have said get something to set your stuff correctly.. $150 dd-1 or a $800 3k saz, its obvious where to start. also if at that point something is wrong with the amp you got now, atleast youll have the right tools to set up the new one. 2007 trailblazer lthead unit- pioneer p4300dvd crescendo ft-1 supertweeters pioneer m650 pros audiocontrol 2xs crossover Rockford fosgate p200-2 highsrockford fosgate p400-2 mids1- fi btl 18amps- saz 3500battery- evermax in front, 2 9a31 dekas in rearwires all knuconceptz 1/0 and rcas
BassMunky Posted December 16, 2011 Author Report Posted December 16, 2011 http://www.caraudio.com/forums/amplifiers/164136-test-tones.html http://www.caraudio.com/forums/amplifiers/164826-amplifier-setting-tutorial.html http://www.caraudio.com/forums/amplifiers/206371-general-amplifier-information-consolidated-list-amp-discussion-stickies-more.html Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
BassMunky Posted December 18, 2011 Author Report Posted December 18, 2011 http://www.ronelmm.com/tones/ Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
CleanSierra Posted December 18, 2011 Report Posted December 18, 2011 Why are you posting random links to bump your thread? It makes no sense...what is your intention with posting these useless links? Im not the one you want to try to troll. Just a fyi for you.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.