flwatersaver Posted December 26, 2011 Report Share Posted December 26, 2011 Watch the video. It does this on all 3 RCA sets, with both the 40hz track and the 1khz track. The head unit plays both tracks fine going through the amps. Testing the DD-1 with the amps has the same result as CJ18's Here is a short video of the DD-1 http://www.youtube.com/watch?v=g1NO44Hwp3s The 3sixty.2 is still in the box. My selling FeedbackBuild log - Blazer C pillar wall, Two DC Audio 3.5k'sTEAM PSI Link to comment Share on other sites More sharing options...
30Hz.wav Posted December 26, 2011 Report Share Posted December 26, 2011 I'm no expert here, but how is the voltage looking when you are doing this? Have you tried doing it with the car on? Link to comment Share on other sites More sharing options...
POPLERO Posted December 26, 2011 Report Share Posted December 26, 2011 maybe troubleshoot all minor possibilities.. voltage, connections, conductivity, etc 2008 TBSS Black Granite Alpine CDA-117 Clarion EQS746 AudioQue Supertweets @ dash Alpine DDT-s30 @ b pillars Alpine SPR-60c @ front doors Alpine SPR-60 @ rear doors Alpine PDX-f4 Second Skin DampPro KNUkonceptz Wiring DCpower 270amp alt Optima YT underhood *temp Two15DCxls Hifonics bxi2610 *temp saz4500 and 4 xp3000s coming soon. Link to comment Share on other sites More sharing options...
meade916 Posted December 26, 2011 Report Share Posted December 26, 2011 are you using the supplied RCA harness or your own? Some RCA's are too fat to fit due to the plastic case limitations. It doesnt have room for it to make full contact and can cause it to act funny if not fully inserted. Either way, dont worry, we will get to the bottom of this. I just contacted Tony. I can ship you out a brand new one today if we end up shipping that one back. All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
flwatersaver Posted December 26, 2011 Author Report Share Posted December 26, 2011 are you using the supplied RCA harness or your own? Some RCA's are too fat to fit due to the plastic case limitations. It doesnt have room for it to make full contact and can cause it to act funny if not fully inserted. Either way, dont worry, we will get to the bottom of this. I just contacted Tony. I can ship you out a brand new one today if we end up shipping that one back. I removed the top plastic part due to the size of the rca's, Just to try and eliminate everything. The voltage. My selling FeedbackBuild log - Blazer C pillar wall, Two DC Audio 3.5k'sTEAM PSI Link to comment Share on other sites More sharing options...
santo Posted December 26, 2011 Report Share Posted December 26, 2011 you know, mine did that once. I checked the ground and bammmmm it was a bad connection. It hasn't done that again. I notice mine is really sensible to ground connection. Link to comment Share on other sites More sharing options...
n8ball2013 Posted December 26, 2011 Report Share Posted December 26, 2011 you say both the 40 hz and 1khz track did you try the 0 db track just to see if it will work. I had an issue with mine and it turned out to be not plugged in tight enough. tightened it down more and away we went. THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
flwatersaver Posted December 26, 2011 Author Report Share Posted December 26, 2011 you know, mine did that once. I checked the ground and bammmmm it was a bad connection. It hasn't done that again. I notice mine is really sensible to ground connection. I went back out and used the supplied harness, made sure I had a good ground, Same thing. My selling FeedbackBuild log - Blazer C pillar wall, Two DC Audio 3.5k'sTEAM PSI Link to comment Share on other sites More sharing options...
flwatersaver Posted December 26, 2011 Author Report Share Posted December 26, 2011 you say both the 40 hz and 1khz track did you try the 0 db track just to see if it will work. I had an issue with mine and it turned out to be not plugged in tight enough. tightened it down more and away we went. Track 1 and 2 are at -0bd My selling FeedbackBuild log - Blazer C pillar wall, Two DC Audio 3.5k'sTEAM PSI Link to comment Share on other sites More sharing options...
SQMonte Posted December 26, 2011 Report Share Posted December 26, 2011 I can ship you out a brand new one today if we end up shipping that one back.That's customer service! Alpine CDA-117...Memphis 16-X03 CDT Audio SQA-4100...SEAS Prestige H1396...Crescendo MP-6 Soundstream Rubicon 1.2500d...Digital Designs 3512f Link to comment Share on other sites More sharing options...
Recommended Posts