Jump to content

Recommended Posts

Posted

So what exactly was going on with he wall? Just bad structural integrity or what?

Yeah the whole thing was ripping apart. The whole baffle was flexing a half an inch at least. Cracking in the fiberglass was occuring all around the port, and the bottom of the port. See.... what people don't know was the top of the port was made of foam, and body filller. When the port started to flex... the foam and body filler started to crack, the whole baffle started to flex and crack. Which almost seemed to me the whole baffle needed to be replaced..... which it did..... but I decided to reinforce the whole thing to be bullet proof. Which would be much easier.

7w1lnOR.jpg

2004 Bagged Trailblazer

(4)18" Sundown Nsv3s
(4) Taramps HD10000s, Taramps DSP3000, Lanzar opti 250x2, AB 100x4
(2)DC power SP 270s, (14)XS Power d3100s, (1)d6500

 

Posted

Ouch. Hope it doesnt give in again.

under construction

I hate People with crappy primered cars rolling on hubcaps that are louder then me.

u hate c-fizzy?

Posted

Ouch. Hope it doesnt give in again.

No shitttt....... or the whole baffle would need to be redone. Like I said...... I super model seems super hot until the makeup is taken off......

7w1lnOR.jpg

2004 Bagged Trailblazer

(4)18" Sundown Nsv3s
(4) Taramps HD10000s, Taramps DSP3000, Lanzar opti 250x2, AB 100x4
(2)DC power SP 270s, (14)XS Power d3100s, (1)d6500

 

Posted

All I can say is wow!!List some pics of the Level 6's when you get them.Did you get rid of all of the level 5's and what impedance?I have two level 5 18's but there .7 ohm

I have them all sale pending to one guy, they're dual 2s. Illl get dual .7 level 6s so I can wire to.7 daily on the 10ks each.

7w1lnOR.jpg

2004 Bagged Trailblazer

(4)18" Sundown Nsv3s
(4) Taramps HD10000s, Taramps DSP3000, Lanzar opti 250x2, AB 100x4
(2)DC power SP 270s, (14)XS Power d3100s, (1)d6500

 

Posted

She really is a looker!

Don't know if you have enough room to screw the baffle to the top of the box using some L iron?

Good luck & keep us updated!

Build her strong as the 2 10k's will add some brutallity :D

Woofer: 12" Phase Linear Aliante Limited

Mids & highs: DLS Ultimate 5 1/4"

Amp: Audison VRX 6.420

HU: Sony CDX-C90R

Posted

nice to see updates.

why are you cutting down on the doors so much?

They werent really working out like I hoped, and I think theres too many speakers now that I got them done. Need to work on fiberglassing..... lol.

She really is a looker!

Don't know if you have enough room to screw the baffle to the top of the box using some L iron?

Good luck & keep us updated!

Build her strong as the 2 10k's will add some brutallity :D

Already planned on angle iron, or maybe just some thick L brackets. Havent gotten that far yet.... and after I get it all braced to where it wont crack anymore, gonna shoot it with some high gloss white paint and clear coat. Should be sexy. Then stripper pole, custom center console, and mdf/ fiberglass roof.

10ks will make this thing scream. Hoping for 63s or 64s when fully done. :drink40:

7w1lnOR.jpg

2004 Bagged Trailblazer

(4)18" Sundown Nsv3s
(4) Taramps HD10000s, Taramps DSP3000, Lanzar opti 250x2, AB 100x4
(2)DC power SP 270s, (14)XS Power d3100s, (1)d6500

 

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1908 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...