corona_jeff Posted January 23, 2012 Report Share Posted January 23, 2012 Well after fighting the cold, and making plans for a system rebuild I finally stripped the truck. I put things off as long as possable because I knew I needed to pull out another companies deadening. I knew it would be a pain and take come work. Well to my suprise this is what I saw once I pulled the headliner down. FAIL!! All it took was a few mins pulling and it was out. Well after comparing this to the Alpha I have to say, the alpha is by far the best I have seen or used. The foil is insane! After the first piece installed I could already tell the difference done to the roof. As I know the front half takes the most abuse I double layered that area. I know its probably don't need that much, but I don't wanna take the change again cause its a pain to get it out. ALPHA DONE Quote Link to comment Share on other sites More sharing options...
Second Skin Rep Jon Posted January 23, 2012 Report Share Posted January 23, 2012 Awesome! Have any issues installing it due to the foil thickness, it being cold, etc.? Quote Have a question about Second Skin? E-Mail me! Link to comment Share on other sites More sharing options...
corona_jeff Posted January 23, 2012 Author Report Share Posted January 23, 2012 Jon, nope. But i did buy a nice ss roller a few months back. With that it was easy. I also hit the sticky side with a hair dry to, dunno if that helped any Quote Link to comment Share on other sites More sharing options...
Second Skin Rep Jon Posted January 23, 2012 Report Share Posted January 23, 2012 It probably would had stuck just fine but It never hurts when installing it in temps hovering around freezing. Thanks for the review, can't wait to see/hear what the the results are. Quote Have a question about Second Skin? E-Mail me! Link to comment Share on other sites More sharing options...
POPLERO Posted January 23, 2012 Report Share Posted January 23, 2012 (edited) Nice review! I personally have *not tryed many deadeners but want to do the headliner once and only once, what range of temp does your vehicles roof see? I would like to know if this would be one of the better choices not only for the sound deadening but for adhesion durin various temps. I see anywhere from 120 to 30 degrees. Edited January 23, 2012 by POPLERO Quote 2008 TBSS Black Granite Alpine CDA-117 Clarion EQS746 AudioQue Supertweets @ dash Alpine DDT-s30 @ b pillars Alpine SPR-60c @ front doors Alpine SPR-60 @ rear doors Alpine PDX-f4 Second Skin DampPro KNUkonceptz Wiring DCpower 270amp alt Optima YT underhood *temp Two15DCxls Hifonics bxi2610 *temp saz4500 and 4 xp3000s coming soon. Link to comment Share on other sites More sharing options...
POPLERO Posted January 23, 2012 Report Share Posted January 23, 2012 (edited) **double post. Sorry. Edited January 23, 2012 by POPLERO Quote 2008 TBSS Black Granite Alpine CDA-117 Clarion EQS746 AudioQue Supertweets @ dash Alpine DDT-s30 @ b pillars Alpine SPR-60c @ front doors Alpine SPR-60 @ rear doors Alpine PDX-f4 Second Skin DampPro KNUkonceptz Wiring DCpower 270amp alt Optima YT underhood *temp Two15DCxls Hifonics bxi2610 *temp saz4500 and 4 xp3000s coming soon. Link to comment Share on other sites More sharing options...
corona_jeff Posted January 23, 2012 Author Report Share Posted January 23, 2012 Below freeze to the depths of hell Quote Link to comment Share on other sites More sharing options...
RickyFriery97 Posted January 23, 2012 Report Share Posted January 23, 2012 Nice review! I'm bout to order a pack for the roof of my Tahoe. It sounds like a tin can with one 18" so two in there will destroy it Can't wait to try it out Quote 2014 Chevy Silverado Crewcab 1994 Chevy Full Size blazer Link to comment Share on other sites More sharing options...
xterraboy03 Posted January 23, 2012 Report Share Posted January 23, 2012 (edited) Have to love second skin I love what is in my x Edited January 23, 2012 by xterraboy03 Quote 03' NISSAN XTERRA (1) AQ3500d (1) AQ4x90 (1) Audio Control Line Driver (4) DC LVL 4 15's Cresendo Mids and Highs 100' of 0/guage Big Three Mechman 270a Charging @ 16.5v (6) XS D1400's Highest Termlab Score 149.9 at the kick & 166.1 in the Port/ on stock electrical and 1 DC XL M1 Updated JUNE 2012*****MY BUILD LOG USACI REGION 6 POINTS LEADER 2011 USACI KANSAS RECORD HOLDER 2011 Team DC http://www.dcsoundlab.com/ Link to comment Share on other sites More sharing options...
deathcards Posted January 23, 2012 Report Share Posted January 23, 2012 it does a great job just wish i could keep my trunk from slapping other than that i hear no rattles from the trunk Quote skar sk2500.1 0 gauge power and ground kunukonceptz alpine HUvxi65 components on BA gt-275new build log -> http://www.stevemeadedesigns.com/board/topic/150642-project-d-kon-deathcards-build-log/#entry2148821 2 x-15 sundowns singer alt, odyssey bat, and maxwell ultra caps Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.