darksoul187 Posted February 12, 2012 Report Share Posted February 12, 2012 iv used goof off when mine broke plus i had strips going down my car and used that to get it off never seemed to harm my paint Quote 2009 Malibu LTZHead Unit - Pioneer AVH-P4300DVDSubs - 2 DC Audio m2 XL 15'sAmplifier - DC 5kWire - KnukonceptzAlternator - OhioGenBatteries - 2 XS Power 3100's, 1 d4700 Link to comment Share on other sites More sharing options...
Bigsix Posted February 12, 2012 Report Share Posted February 12, 2012 They make an "eraser" that you chuck up in a drill for removing that shit, my buddy works in a body shop and gave me one when I de badged one of my cars..worked amazing Ill call him and see what they are called... Quote 1999 Lincoln Town Car-(build underway) - (2) SA15s, 4th order, DAT 2500.1, O2 mids n highs, 250a alt, HC 2400, Big 3.... 1994 Pontiac T/A for speeding tickets.- - Currently on jack stands, wanting to be a real race car "Your local forecast, all the ladies in the metro area should expect to see 8 inches tonight" - The Todd Decaf, on 01 November 2011 - 02:38 PM, said: i provide the ammo for destruction, the trigger finger is connected to the volume knob tho URBAN GORILLA AUDIO Link to comment Share on other sites More sharing options...
Bigsix Posted February 12, 2012 Report Share Posted February 12, 2012 And I ve seen gasoline leave the clear coat looking foggy, in my opinion I'd stay away from that. Quote 1999 Lincoln Town Car-(build underway) - (2) SA15s, 4th order, DAT 2500.1, O2 mids n highs, 250a alt, HC 2400, Big 3.... 1994 Pontiac T/A for speeding tickets.- - Currently on jack stands, wanting to be a real race car "Your local forecast, all the ladies in the metro area should expect to see 8 inches tonight" - The Todd Decaf, on 01 November 2011 - 02:38 PM, said: i provide the ammo for destruction, the trigger finger is connected to the volume knob tho URBAN GORILLA AUDIO Link to comment Share on other sites More sharing options...
lauchie Posted February 12, 2012 Report Share Posted February 12, 2012 lighter fluid that you would put in a zippo lighter,best decal remover out there,wont harm your paint either,it says right on the bottle that it is good for removing decals,tar,etc Quote Link to comment Share on other sites More sharing options...
mbdblue Posted February 12, 2012 Report Share Posted February 12, 2012 the eraser wheel is made by 3M and is called a stripe off wheel.....best thing you can use to not hurt the paint, but it is a little pricey. like other said, a nearby bodyshop should have one. Quote AA-Atomic-Clif Designs-DC-Diamond-Digital Designs-Directed-Eclipse-Fi-Hertz-Hifonics-Kenwood-Memphis-Phoenix Gold-Pioneer-PPI-PSi-Stinger-Sundown-TC Sounds-Viper-Zapco Link to comment Share on other sites More sharing options...
kickass audio Posted February 12, 2012 Report Share Posted February 12, 2012 brake cleaner, brake fluid, and power steering fluid will eat your paint right off. Id see if you can try to heat it up and scrape it off carefully. Sometimes the glue OEM places use will come off easier with heat applied to them. Quote 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
Cutdeluxes1 Posted February 15, 2012 Author Report Share Posted February 15, 2012 Well i already heated it up and removed all i could. Even scraped it down. so ill try the 3m eraser and see if that helps. Thanks again everyone! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.