Jump to content

March 2012 SOTM Nominees - Sponsored by Audio Savings


Recommended Posts

<--- Nominates Cableguy184, if he has not been nominated yet.

He has some great quality gear in that truck, a lot of the stuff that not mane use anymore, or even aware it exists!

I was gonna nominate him too! The truck, the build, the equipment, all gorgeous! He deserves more recognition than he receives. Truely a deserving system to win a SOTM!

Pioneer AVH480

Zapco ST5XII amplifier

Stevens Audio 6.5" components (passive)

Onyx Subwoofer

Sky High OFC wiring

Link to comment
Share on other sites

nobody likes naked boxes? ok ill delete it

Its in the rules you are supposed to read.

Also says %95 done.

EDIT:

OK, My I appologise for that. I went back over the rules again and it said "No bare boxes" ... My bad.

06 Corolla Ascent

Kicker ZX300.1

Kicker Comp 12"

Kicker KS600 x 4

Pioneer DEH7500

More to come - Firstly, need money. :\

Link to comment
Share on other sites

It says no bare boxes. Plain as day.

Yep. Just saw that. Sorry.

06 Corolla Ascent

Kicker ZX300.1

Kicker Comp 12"

Kicker KS600 x 4

Pioneer DEH7500

More to come - Firstly, need money. :\

Link to comment
Share on other sites

At some point years ago the decision was made that mods cannot enter SOTM because they can tamper with the voting. I am pretty sure that after several upgrades to the forum mods cannot influence the voting so are mods allowed to enter?!

If so, I'll throw my estimated 750wrms into the mix :)

-Drew

detail.gifI am a United States Military Arts and Crafts Professional. Sand it off, Paint it on. detail.gif

uhoh_45 said:
dont be a pussy P give the jeep to drew
Link to comment
Share on other sites

At some point years ago the decision was made that mods cannot enter SOTM because they can tamper with the voting. I am pretty sure that after several upgrades to the forum mods cannot influence the voting so are mods allowed to enter?!

If so, I'll throw my estimated 750wrms into the mix :)

-Drew

Hm, part 9 of the SOTM rules say other"9.) Staff of SMD (mods/supermods/admins) are no longer eligible of running in SOTM."

"in the abundance of water, the fool is thirsty" Bob Marley

Link to comment
Share on other sites

OMG!!! Finally one for the guys on budget systems! Well Here is my system, I am running an Alpine MRV-F250 only with channels 1+2 on the subs and 3+4 on the rear 6x9's the front 6.5 Co-Axials are running off the HU, which is 25 watts total I believe, does not exceed 50. I have a stock alt, but never get any dimming in power or any signs of voltage drop that you can tell with out a voltage meter. So I can't say exactly what the voltage is exactly but you can get a figure as to what my stages are seeing. I have the 6x9s wired straight @ 4 ohms and the subs are wired down to 2 ohms. Here is the amps specs:

- RMS Continuous Power output (@ 12.0V 20 Hz to 20 kHz)

25 watts x 4 @ 4 ohms, 0.08% THD

35 watts x 4 @ 2 ohms, 0.3% THD

70 watts bridged into 4 ohms, 0.3% THD

- Dynamic Power (@ 14.4V, 20 Hz to 20 kHz)

40 watts x 4 @ 4 ohms, 0.08% THD

50 watts x 4 @ 2 ohms, 0.3% THD

100 watts bridged into 4 ohms, 0.3% THD

Total RMS: 170-200 (Depending on voltage, and not incorperating imdependence rise)

Here are some videos of the system. With this small power I can get my hatch to flex, and a small amount of steering wheel dancing. They are older but the system is still slammen!

I am so happy to see this one this month, and I wish everyone the best luck!

Build log here.

http://www.stevemeadedesigns.com/board/topic/112813-91-civic-hatchback-been-waiting-to-post-this/page__gopid__1577778#entry1577778

Edit: I know it says no bare boxes, I don't plan on ever carpeting or painting my box only because it's not going to be permanent and don't want to waste any resources I don't have.

On 11/20/2012 at 8:54 PM, AMI CUSTOMS said:

Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol.

On 5/9/2012 at 8:45 PM, skittlesRgood said:

fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point

On 4/10/2013 at 12:26 PM, mrd6 said:

I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha

  • Soon To Be
  • '04 Ford Escape
  • US Alternator 280A Hairpin
  • D4800 Under the Hood
  • (6) XP3000's in Rear
  • 1/0 SHCA & XS Power 4 runs to back
  • TORK2 kit from Tony @ CE Auto Supply
  • Pioneer DEH-80PRS
  • DD AW6.5 (2) per door
  • *Tweeter Unkown*
  • DD SS4a & C3d
  • (2) SCV4000 @ .5Ohm
  • (2) 15" Sundown Zv5
Link to comment
Share on other sites

At some point years ago the decision was made that mods cannot enter SOTM because they can tamper with the voting. I am pretty sure that after several upgrades to the forum mods cannot influence the voting so are mods allowed to enter?! If so, I'll throw my estimated 750wrms into the mix :) -Drew
Hm, part 9 of the SOTM rules say other"9.) Staff of SMD (mods/supermods/admins) are no longer eligible of running in SOTM."

It seems like I phrased my initial post wrong. The qustion wasn't so much "can mods enter?" but more, "should reds and blues be able to enter now that they cannot influence the voting? because if so I want in"

Either way you also pointed out that i posted it in the wrong section, my mistake.

-Drew

detail.gifI am a United States Military Arts and Crafts Professional. Sand it off, Paint it on. detail.gif

uhoh_45 said:
dont be a pussy P give the jeep to drew
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1236 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...