Jump to content
Second Skin Audio

new to audio need help with box\subs\amp\ect.


Recommended Posts

ok so im 16 and i got my truck last year 97 dakota ext cab. replaced the facotry radio and speakers with kicker ks65 in all 4 spots. also replaced HU with JVC KD-R320. no seperate amps powering speakers. im a kid that likes to have bass but my speakers wont handle it. i blew one within a week and almost blew a second within a month. i know kicker isnt the greatest brand but its all best buy had that i liked. so anyways i would like subs so i dont have to deal with clipping on my speakers like they do if i turn it up to much.

so i am looking at choices for subs and im not sure what i want. i was looking at 2 12" kicker crv 2ohm dvc but ive been hearing alot of bad about them. i then was looking at a dc lvl3 15" or decent cheap 18".

my budget for total build is about $800 for sub(s), amps, wiring, ect.

so i need help finding subs, amp and i also need help designing a box.

send me a message if u need any info

Edited by KiKaZz74

My SPL to SQ Build Log

Vehicle:
1997 Dodge Dakota Ext Cab 4x4 2009 Dodge Journey SXT
5.2L V8 Magnum 3.5L V6
Stock Alt

Equipment:

Headunit- Alpine CDE-147BT

Mids/Highs Amp- JL Audio G6600 Class AB 6 Channel

Sub Amp- Hifonics BRZ1700.1D @ 2 Ohms Taramps DSP3000.1D

Sub- Hertz Hi Energy 12" HX300D SounDrive SDA3 12

Tweeters- Rockford Fosgate Power Series Silk Domes Hertz Hi-Energy

Mids- Dayton Audio Reference 4" Full Range Drivers 

Midbass- Silver Flute 6.5" Hertz Hi-Energy 6.5"

Processor- MiniDSP 2x4

RCA- 6 channels of SounDrive HF series

Wire- EB Flex 2/0

 

-Member of Team SounDrive

Link to comment
Share on other sites

Kicker isn't a bad brand at all, a little overpriced IMO but not bad. As far as your subs blowing, it may have been caused by a clipped signal from the amp. Even the best quality subs can't take a clipped signal for long. With a budget of 800 you can get a pretty decent sub(s) and amp. The quality of how it all sounds will be in the install. So do some reading here and learn as much as you can.

Link to comment
Share on other sites

srry what i was saying is my ks65 are clipping like not enough power wise? and i blew one. i dont have any amps or subs yet thats what im trying to look into. im installing and making box and wiring myself.

My SPL to SQ Build Log

Vehicle:
1997 Dodge Dakota Ext Cab 4x4 2009 Dodge Journey SXT
5.2L V8 Magnum 3.5L V6
Stock Alt

Equipment:

Headunit- Alpine CDE-147BT

Mids/Highs Amp- JL Audio G6600 Class AB 6 Channel

Sub Amp- Hifonics BRZ1700.1D @ 2 Ohms Taramps DSP3000.1D

Sub- Hertz Hi Energy 12" HX300D SounDrive SDA3 12

Tweeters- Rockford Fosgate Power Series Silk Domes Hertz Hi-Energy

Mids- Dayton Audio Reference 4" Full Range Drivers 

Midbass- Silver Flute 6.5" Hertz Hi-Energy 6.5"

Processor- MiniDSP 2x4

RCA- 6 channels of SounDrive HF series

Wire- EB Flex 2/0

 

-Member of Team SounDrive

Link to comment
Share on other sites

thanks and ya i know ive followed on facebook for 6+ months and they always get good reviews.

My SPL to SQ Build Log

Vehicle:
1997 Dodge Dakota Ext Cab 4x4 2009 Dodge Journey SXT
5.2L V8 Magnum 3.5L V6
Stock Alt

Equipment:

Headunit- Alpine CDE-147BT

Mids/Highs Amp- JL Audio G6600 Class AB 6 Channel

Sub Amp- Hifonics BRZ1700.1D @ 2 Ohms Taramps DSP3000.1D

Sub- Hertz Hi Energy 12" HX300D SounDrive SDA3 12

Tweeters- Rockford Fosgate Power Series Silk Domes Hertz Hi-Energy

Mids- Dayton Audio Reference 4" Full Range Drivers 

Midbass- Silver Flute 6.5" Hertz Hi-Energy 6.5"

Processor- MiniDSP 2x4

RCA- 6 channels of SounDrive HF series

Wire- EB Flex 2/0

 

-Member of Team SounDrive

Link to comment
Share on other sites

For that budget, I think:

Big 3. AudioQue/Sundown/Skar 1200 or 1500 Watt. 2 Skar/Obsidian/Sundown 12's. If you go with the Skars you can get the 2 Subs and a box deal.

If you get any voltage drop with that get a bigger battery, and you should be good.

*New vehicle and system coming soon.*

Link to comment
Share on other sites

btw guys this build wont happen till like july. but if i can start getting stuff together i can save it and get stuff ran. gotta wait for corn detassling for some extra money.

My SPL to SQ Build Log

Vehicle:
1997 Dodge Dakota Ext Cab 4x4 2009 Dodge Journey SXT
5.2L V8 Magnum 3.5L V6
Stock Alt

Equipment:

Headunit- Alpine CDE-147BT

Mids/Highs Amp- JL Audio G6600 Class AB 6 Channel

Sub Amp- Hifonics BRZ1700.1D @ 2 Ohms Taramps DSP3000.1D

Sub- Hertz Hi Energy 12" HX300D SounDrive SDA3 12

Tweeters- Rockford Fosgate Power Series Silk Domes Hertz Hi-Energy

Mids- Dayton Audio Reference 4" Full Range Drivers 

Midbass- Silver Flute 6.5" Hertz Hi-Energy 6.5"

Processor- MiniDSP 2x4

RCA- 6 channels of SounDrive HF series

Wire- EB Flex 2/0

 

-Member of Team SounDrive

Link to comment
Share on other sites

clipping is when you drive an amplifier too hard. aka try to make it output more power than it was designed to. aka turning up the volume/gain knob too high. thats how speakers blow 99% of the time.

Link to comment
Share on other sites

clipping is when you drive an amplifier too hard. aka try to make it output more power than it was designed to. aka turning up the volume/gain knob too high. thats how speakers blow 99% of the time.

oh well then i have another problem but thanks. mines like my HU cant handle power so speakers start popping and shit and ya. doesnt sound good then but they not meant to handle to much bass like i give them even on stock power

My SPL to SQ Build Log

Vehicle:
1997 Dodge Dakota Ext Cab 4x4 2009 Dodge Journey SXT
5.2L V8 Magnum 3.5L V6
Stock Alt

Equipment:

Headunit- Alpine CDE-147BT

Mids/Highs Amp- JL Audio G6600 Class AB 6 Channel

Sub Amp- Hifonics BRZ1700.1D @ 2 Ohms Taramps DSP3000.1D

Sub- Hertz Hi Energy 12" HX300D SounDrive SDA3 12

Tweeters- Rockford Fosgate Power Series Silk Domes Hertz Hi-Energy

Mids- Dayton Audio Reference 4" Full Range Drivers 

Midbass- Silver Flute 6.5" Hertz Hi-Energy 6.5"

Processor- MiniDSP 2x4

RCA- 6 channels of SounDrive HF series

Wire- EB Flex 2/0

 

-Member of Team SounDrive

Link to comment
Share on other sites

if your blowing mids with a HU..i highly doubt you should be trying to hook up amps/subs until you do alot more learning on here..to be honest

http://www.stevemead...cherokee-build/

2005 Jeep Grand Cherokee

Alpine CDE-hd148bt

Alpine PKG-RSE2

PRV Audio (4) 6MB200 front/rear doors

PRV Audio (4) TW350Ti dash/rear doors

Kicker KX350.4

Obsidian Audio (1) 18 D4 v2

revamp (2) Stereo Integrity HT 18d2
DC Audio 1.2k
5.25ft^3 tuned @34hz

revamp Infinite Baffle Cpillar

AudioTechnix 60mil deadener
KnuKonceptz & SkyHigh wire (complete setup)

stroupe79.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   2 Members, 0 Anonymous, 1772 Guests (See full list)

×
×
  • Create New...