Jump to content

1994 Ford F350 CC Build- Stalled out for a bit! Sorry!


Recommended Posts

Posted

Ok I think I've got it! Here's the diagram, not sure if it's big enough or not, I can't figure out how to blow it up!

TruckSignalWiringDiagram.jpg

If you can't see it, I'll run it down for you. Here's the way it goes!

From the Pioneer Head Unit:

Front/tweeter: To Tweeters on the 4.600 channels 1 & 2

Rear/Mid: To Mid Range (6.5's) on 4.600 channels 3 & 4

Sub/Mid Bass: To Mid Bass (8's) on 1.1600

Signal then comes out of the 1.1600 pre out rca's into an Audio Control 6XS 6 Channel Electronic Crossover into the "Front" channels or in 2 channel mode.

From the 6XS the outputs look like this:

"Front Highpass Output" to the rear tweeters on the 4.600 channels 1 & 2

"Front Lowpass Output" to the rear mid bass on the 4.600 channels 3 & 4

"Subwoofer Output" to the Subs on the 2 - 1.2500D's

Now, control. I obviously won't be able to control the rear stage like I was hoping to, but that's the way things go sometimes. I can, however, control the subs from the 6XS, or the amp volume control knob directly. I'm not sure which is best. Anyone have any input on this?

Posted

I was just hoping to be able to turn it down sometimes if I wanted to. But it's not a huge deal. I would like the ability to adjust crossover points though to tune it in. When I tune it, I'll tune it to the rear seats and that way it sounds great there, and not better up front then back. Make sense?

Posted

Ok so good news and bad news! I got my 2 Rubicon 4.600's in today! WOOHOO! But I'm pissed! I understood that they were manufacture refurbished, but here is what the description says, if you've never read it:

"Manufacturer Refurbished: An item that has been professionally restored to working order by a manufacturer or manufacturer-approved vendor. This means the product has been inspected, cleaned, and repaired to meet manufacturer specification and is in excellent condition. This item may or may not be in the original packaging."

So I opened them up and took a look and they're all messed up. They've got dings and scratches all over them, scuffs, dirt marks (like finger prints), and one of them even has the power led missing from it. Needless to say I'm pissed! I've emailed them already to see what they're going to do.

Here are some pics:

IMG_20120412_145539.jpg

IMG_20120412_145709.jpg

IMG_20120412_150219.jpg

IMG_20120412_145801.jpg

IMG_20120412_145830.jpg

IMG_20120412_150037.jpg

IMG_20120412_150124.jpg

IMG_20120412_150114.jpg

I'll let everyone know what happens!

Posted

Ok, so I took half the day off to go home and take care of some stuff there. HOWEVER, right before I left, I got a little package! It was heavy, and I thought it was too small to be an amplifier! So what the hell could it be???

IMG_20120413_113404.jpg

Let's open her up and see!

WOOOOOOWWWWWWWW! For the weight I could not honestly believe this is what was in there! Really!

IMG_20120413_113428.jpg

These are bestial tweeter! Let's check em out!

IMG_20120413_113533.jpg

Little lacking in packaging but they weren't moving upon even shaking the box.

I got myself a nice diagram on what to use for components on a crossover if I wanted to make one.

IMG_20120413_113526.jpg

Also included is a cap.

IMG_20120413_113559.jpg

It's certainly better looking in person that on line! These are sweet looking!

IMG_20120413_113618.jpg

IMG_20120413_113628.jpg

So I decided to put em up against what they're going in the doors with. I was shocked. These are just as heavy if not heavier, than the 6 1/2" mid ranges. No bull!

IMG_20120413_113847.jpg

Size comparison!

IMG_20120413_113853.jpg

So needless to say, I'm very impressed with these! If they sound as good as they're built, these are gonna kill the highs! I can't wait! Gonna really have to think about the doors now. Cause I had no real idea they were so large! Not a problem, cause after moving the 8's to the center console, there's gonna be plenty of room!

I also busted out the Pioneer DEH-80PRS, and the tablet. I had the thought that maybe, even if I'm not running the tablet off the usb, that the usb connection on the PRS might charge the tablet. Well, unfortunately, I get the red "x" on the battery on the tablet so that means no charging! Bummer! But that's ok, cause I still have that power converter that was designed for me, and I'll just continue to plan on using that!

That's all for today!

Posted

Ok, so I took half the day off to go home and take care of some stuff there. HOWEVER, right before I left, I got a little package! It was heavy, and I thought it was too small to be an amplifier! So what the hell could it be???

IMG_20120413_113404.jpg

Let's open her up and see!

WOOOOOOWWWWWWWW! For the weight I could not honestly believe this is what was in there! Really!

IMG_20120413_113428.jpg

These are bestial tweeter! Let's check em out!

IMG_20120413_113533.jpg

Little lacking in packaging but they weren't moving upon even shaking the box.

I got myself a nice diagram on what to use for components on a crossover if I wanted to make one.

IMG_20120413_113526.jpg

Also included is a cap.

IMG_20120413_113559.jpg

It's certainly better looking in person that on line! These are sweet looking!

IMG_20120413_113618.jpg

IMG_20120413_113628.jpg

So I decided to put em up against what they're going in the doors with. I was shocked. These are just as heavy if not heavier, than the 6 1/2" mid ranges. No bull!

IMG_20120413_113847.jpg

Size comparison!

IMG_20120413_113853.jpg

So needless to say, I'm very impressed with these! If they sound as good as they're built, these are gonna kill the highs! I can't wait! Gonna really have to think about the doors now. Cause I had no real idea they were so large! Not a problem, cause after moving the 8's to the center console, there's gonna be plenty of room!

I also busted out the Pioneer DEH-80PRS, and the tablet. I had the thought that maybe, even if I'm not running the tablet off the usb, that the usb connection on the PRS might charge the tablet. Well, unfortunately, I get the red "x" on the battery on the tablet so that means no charging! Bummer! But that's ok, cause I still have that power converter that was designed for me, and I'll just continue to plan on using that!

That's all for today!

Ooohh I was skeptical about their PA stuff since I have never heard em in person but they look sexy, :popcorn for sound results. I say you put them on a test bench and tell me how they sound. Speaking of power converters pm your paypal email so I can get that item that we talked about.

2013 Dodge Charger

Build Log


1996 Ford Explorer XLT 5.0
Build Log

2005 Honda Civic LX Coupe

Build Log

SMD SUPER SELLER!!!!
My Selling Feedback

Dresig1_zps7acbddbb.gif

Dresig2_zpscfb11527.gif

Posted

Good God those things look they're gonna rape your ears!!!

Shitty situation about the amps, but at least they're taking care of it!

Tuned in as usual Scooter :good: Expecting nothing but shock and awe and amazement in the future!

My name is AdamThis is my Civic Build.7" Samsung Tab 2Kenwood KDC-X896Clarion EQS746Sundown X-15DC 3.5k @2ohmHatersGonnaHate's 02 Civic UBLELD Bypass for Honda Civic/Accord/FitDon's Jeep Grand Cherokee Rebuild

N8ball2013 - i think you'd stick your dick in a blender if it told you it was 40 wtih two kids your age. lol

srp365 - If posting were picking up bitches, I'd be going home single tonight

looks like tony montana sneezed in your car.

VbjgkeI.jpg

kNsESzw.jpg

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 1147 Guests (See full list)

×
×
  • Create New...