Amart88 Posted April 2, 2012 Report Posted April 2, 2012 (edited) So Right now I have a kinetic HC 1400 as a second battery in paralell with my stock battery. i will be adding 2 XS power xp3000's soon. How do i set these up? can I run the xp's with the kinetic in paralell? and to the stock batt? I have 2 runs of 0 ga from the alt to the back. One run to my stock and one run to my kineitic. I just need to know the best way to wire these damn things up. Thanks I wanted to replace the stock batt with the kinetic but was told they are not mant for that soooo... Edited April 2, 2012 by Amart88 Quote My 2005 s10 blazer build. 4 zcon 18's walled.
getlocivic Posted April 2, 2012 Report Posted April 2, 2012 the kinetik will have a lower resting voltage bc xs power batteries resting voltage is very high so it will bring the xs powers down some Quote
Lbox88 Posted April 2, 2012 Report Posted April 2, 2012 the kinetik will have a lower resting voltage bc xs power batteries resting voltage is very high so it will bring the xs powers down some You mean the stock will unless the kinetic is shot. Mine is in my garage right now resting at 13.1. Quote UBL | Build Log
SnowDrifter Posted April 2, 2012 Report Posted April 2, 2012 the kinetik will have a lower resting voltage bc xs power batteries resting voltage is very high so it will bring the xs powers down some Not sure about Kinetik resting voltage being low. But I can tell you that having your stock battery in there will drag them both down when the car is off. Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
Amart88 Posted April 2, 2012 Author Report Posted April 2, 2012 the kinetik will have a lower resting voltage bc xs power batteries resting voltage is very high so it will bring the xs powers down some Not sure about Kinetik resting voltage being low. But I can tell you that having your stock battery in there will drag them both down when the car is off. So what should I do? I have no money for another XS batt right now. Quote My 2005 s10 blazer build. 4 zcon 18's walled.
getlocivic Posted April 2, 2012 Report Posted April 2, 2012 didnt even see the stock battery part i once had a new kinetik 800 and after i charged it it rested at 12.7 all my xs batteries rest at 13.1 13.2 Quote
SnowDrifter Posted April 2, 2012 Report Posted April 2, 2012 Wait... You confused me lol You are asking about adding in 2 more XS power batteries, but then say you don't have the money? Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
Amart88 Posted April 2, 2012 Author Report Posted April 2, 2012 (edited) Wait... You confused me lol You are asking about adding in 2 more XS power batteries, but then say you don't have the money? LOL I already have 2 xp3000's sitting on the floor beside me. In the car i have a stock and a HC1400. I just dont know where to go from here. best soulution etc. Edited April 2, 2012 by Amart88 Quote My 2005 s10 blazer build. 4 zcon 18's walled.
Zapanater Posted April 3, 2012 Report Posted April 3, 2012 Get a battery isolator. Run it between the stock/Kinteik and the two xs power batteries. Might help with the resting voltage deal. Quote 2015 Subaru Outback. That is all, I refuse to touch it.
CHEVY4X4BLAZER Posted April 3, 2012 Report Posted April 3, 2012 Just sell the kinetic and maintain the XS power on a regular basis until you can upgrade stock. You'll be fine. Use the money from the kinetic to buy the appropriate stock replacement. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.