Jump to content
Second Skin Audio

help with port tuneing


Recommended Posts

OK so i designed my box to be tuned at 33hz with 2 4in aero's at 20in long and it plays the higher notes with authority but not the low notes what im thinking is my tuning is off as the ports come out of the box 12in and the other 8in is in the box would that effect it any or would it still have the same tuning the subs im running are 2 dc lvl 2 12's they are brand new just got them yesterday and i went with dc's recommend box size from there site here are the box specs boxdone.jpg any help is appreciated

1998 neon R.I.P 137.5 db's

Youtube videos http://www.youtube.c...tingarrett64067

2000 Eclipse

Headunit = pioneer avh-p1400dvd

Subwoofers = 2 DC audio lvl 2 12's

Amp= Vibe bass 5 1500rms @ 2ohms

​Single run of 0awg power and ground wire

( Big 3 wire upgrade comeing soon )

Link to comment
Share on other sites

Yes it would, see the box titled external port length? Adjust the numbers so it represnts what your box is.

On 11/20/2012 at 8:54 PM, AMI CUSTOMS said:

Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol.

On 5/9/2012 at 8:45 PM, skittlesRgood said:

fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point

On 4/10/2013 at 12:26 PM, mrd6 said:

I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha

  • Soon To Be
  • '04 Ford Escape
  • US Alternator 280A Hairpin
  • D4800 Under the Hood
  • (6) XP3000's in Rear
  • 1/0 SHCA & XS Power 4 runs to back
  • TORK2 kit from Tony @ CE Auto Supply
  • Pioneer DEH-80PRS
  • DD AW6.5 (2) per door
  • *Tweeter Unkown*
  • DD SS4a & C3d
  • (2) SCV4000 @ .5Ohm
  • (2) 15" Sundown Zv5
Link to comment
Share on other sites

ok i must of over looked that box it brought it down to 32hz which is fine i like the lows but it don't hit them lows with authority could it be there still brand new and don't have even 30 min's playtime on them so there not broken in yet

1998 neon R.I.P 137.5 db's

Youtube videos http://www.youtube.c...tingarrett64067

2000 Eclipse

Headunit = pioneer avh-p1400dvd

Subwoofers = 2 DC audio lvl 2 12's

Amp= Vibe bass 5 1500rms @ 2ohms

​Single run of 0awg power and ground wire

( Big 3 wire upgrade comeing soon )

Link to comment
Share on other sites

I just built this for my lvl 3 12s and it hits harder then ever

http://i15.photobuck...evinss/box5.png

that box specs look prety good but you have lvl 3 and mine are lvl 2

1998 neon R.I.P 137.5 db's

Youtube videos http://www.youtube.c...tingarrett64067

2000 Eclipse

Headunit = pioneer avh-p1400dvd

Subwoofers = 2 DC audio lvl 2 12's

Amp= Vibe bass 5 1500rms @ 2ohms

​Single run of 0awg power and ground wire

( Big 3 wire upgrade comeing soon )

Link to comment
Share on other sites

What is your port area per foot with the updates external port? For Aero ports the general rule is 10-12, if you want the lows try and get closer to the 12. Another thing like you said, since they are brand new, the suspension might be a bit stiff, making it hard to drive them.

On 11/20/2012 at 8:54 PM, AMI CUSTOMS said:

Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol.

On 5/9/2012 at 8:45 PM, skittlesRgood said:

fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point

On 4/10/2013 at 12:26 PM, mrd6 said:

I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha

  • Soon To Be
  • '04 Ford Escape
  • US Alternator 280A Hairpin
  • D4800 Under the Hood
  • (6) XP3000's in Rear
  • 1/0 SHCA & XS Power 4 runs to back
  • TORK2 kit from Tony @ CE Auto Supply
  • Pioneer DEH-80PRS
  • DD AW6.5 (2) per door
  • *Tweeter Unkown*
  • DD SS4a & C3d
  • (2) SCV4000 @ .5Ohm
  • (2) 15" Sundown Zv5
Link to comment
Share on other sites

its close to 10 its at 9.55 but with my old subs the port per foot was only like 5 same style box just bigger cubes and it hit the lows great so i'm leaning towards that there still brand new

1998 neon R.I.P 137.5 db's

Youtube videos http://www.youtube.c...tingarrett64067

2000 Eclipse

Headunit = pioneer avh-p1400dvd

Subwoofers = 2 DC audio lvl 2 12's

Amp= Vibe bass 5 1500rms @ 2ohms

​Single run of 0awg power and ground wire

( Big 3 wire upgrade comeing soon )

Link to comment
Share on other sites

Isn't you net volume a bit small for bottom end on 2 12s?

2.43 on the original post

CURRENT SYSTEM:

  • Alternator:
    1. Stock alt on mids/highs
    2. Isolated DC Power 270 SP - Charging @ 16.8v
  • Batteries: (2) XS D1400s
  • Power Cable: Double Runs of 1/0 KNU Kolossus Fleks
  • Headunit: 80-PRS
  • Sub Amp: DC 5.0k
  • Subwoofers: 2 RE MT 15s /PSI dual .7ohm recones
  • Subwoofer Enclosure: 9.1cubes @ 32hz - brutal.
  • Mids & Highs Amp: CT125.4
  • Active Components:
    • Mids RE XXX 6.5c
    • Highs - 3 RE XXX tweeters per side(A pillar)
  • Noise Control: Damplifier Pro all over the cab.

Build Log

If you do business with me please leave feedback here: FEEDBACK THREAD

 
Highest Legal Score: 151.0 db
Highest Musical 30 Second Average: 151.6 db
Link to comment
Share on other sites

the box size is about right on, but what do you have your subsonicfilter set to?

2007 trailblazer lthead unit- pioneer p4300dvd

crescendo ft-1 supertweeters

pioneer m650 pros

audiocontrol 2xs crossover

Rockford fosgate p200-2 highsrockford fosgate p400-2 mids1- fi btl 18amps- saz 3500battery- evermax in front, 2 9a31 dekas in rearwires all knuconceptz 1/0 and rcas

Link to comment
Share on other sites

Port are per foot of 5?! and it slammed the lows? I don't know man, I have heard that come from people on here who do amazing work with stuff and I put a lot of confidience in their knowledge. 10-12 for aero ports, and 12-16 for slot port, and if you want better low end, build slightly bigger than recommended volume to.

On 11/20/2012 at 8:54 PM, AMI CUSTOMS said:

Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol.

On 5/9/2012 at 8:45 PM, skittlesRgood said:

fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point

On 4/10/2013 at 12:26 PM, mrd6 said:

I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha

  • Soon To Be
  • '04 Ford Escape
  • US Alternator 280A Hairpin
  • D4800 Under the Hood
  • (6) XP3000's in Rear
  • 1/0 SHCA & XS Power 4 runs to back
  • TORK2 kit from Tony @ CE Auto Supply
  • Pioneer DEH-80PRS
  • DD AW6.5 (2) per door
  • *Tweeter Unkown*
  • DD SS4a & C3d
  • (2) SCV4000 @ .5Ohm
  • (2) 15" Sundown Zv5
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 901 Guests (See full list)

×
×
  • Create New...