__d_a_v_i_d__ Posted May 26, 2012 Author Report Share Posted May 26, 2012 need help with sub directions ? Quote Chevy Impala Shocker Sigs / TC Sounds 12s Sundown NS-1 | SAX 100.4 Sundown Neos | Dayton Audio Neos ETCCC ETCCC ETCCC My YouTube ---- Subcribe!! Link to comment Share on other sites More sharing options...
deathcards Posted May 26, 2012 Report Share Posted May 26, 2012 i think up it will get you better numbers . . . sides will get you better quality i think Quote skar sk2500.1 0 gauge power and ground kunukonceptz alpine HUvxi65 components on BA gt-275new build log -> http://www.stevemeadedesigns.com/board/topic/150642-project-d-kon-deathcards-build-log/#entry2148821 2 x-15 sundowns singer alt, odyssey bat, and maxwell ultra caps Link to comment Share on other sites More sharing options...
SPL KID Posted May 26, 2012 Report Share Posted May 26, 2012 To get the most out of it you could do 4 to the top and 4 to the rear and ports to the drivers side. Or something more interestinfg like ports thru the rear deck and 2 on each side of the box and 4 to the rear. Should be nasty either way you go. Quote NSPL 2001 Trunk 251-500 world champion. 2009 2nd place 0-1800 147.9 under 1800 watts. 2011 0-3601 Trunk Champion. No Typo Current 0-3600 Trunk WR Holder! 149.9 (0-1800) /147.5 (1801-3600) /???.? (3601-up) need new front window first! Learn to be quiet about what your workin on.. L O S E = (L)etting (O)thers (S)ee (E)verything Link to comment Share on other sites More sharing options...
__d_a_v_i_d__ Posted May 26, 2012 Author Report Share Posted May 26, 2012 yea, well those are pretty much the only 2 real options for now, Quote Chevy Impala Shocker Sigs / TC Sounds 12s Sundown NS-1 | SAX 100.4 Sundown Neos | Dayton Audio Neos ETCCC ETCCC ETCCC My YouTube ---- Subcribe!! Link to comment Share on other sites More sharing options...
__d_a_v_i_d__ Posted May 26, 2012 Author Report Share Posted May 26, 2012 how does this look !? 12"x26"x36" with 3/4s thick wood. = 5.13 interior volume. with port and sub displacement thats 4.03 cubes, if i measure the tuning with 2 20" 6" aero ports, im at 35hz but thats before displacement if i measure after all displacement im at 40hz... is it after or before ? how does box look ? Quote Chevy Impala Shocker Sigs / TC Sounds 12s Sundown NS-1 | SAX 100.4 Sundown Neos | Dayton Audio Neos ETCCC ETCCC ETCCC My YouTube ---- Subcribe!! Link to comment Share on other sites More sharing options...
john253a Posted May 26, 2012 Report Share Posted May 26, 2012 depending on how you want to cal the displacement but with your box dimension this would be smallest idd build it to, if you wanted slot you could have a lower tune, my opinion is 32/33flat suit this sub, but that my opinion you have the cone area of close to 2x18 and the power of 3-4 of them, i some how dont thing 3/4 will cut it, Ive even be tempted to go 1.5" but seen as its a temp box 1" should do Quote Link to comment Share on other sites More sharing options...
SPL KID Posted May 26, 2012 Report Share Posted May 26, 2012 (edited) Please somebody PM me the link to this program.... ^^^^ thx EDIT : I found it guys! Edited May 26, 2012 by SPL KID Quote NSPL 2001 Trunk 251-500 world champion. 2009 2nd place 0-1800 147.9 under 1800 watts. 2011 0-3601 Trunk Champion. No Typo Current 0-3600 Trunk WR Holder! 149.9 (0-1800) /147.5 (1801-3600) /???.? (3601-up) need new front window first! Learn to be quiet about what your workin on.. L O S E = (L)etting (O)thers (S)ee (E)verything Link to comment Share on other sites More sharing options...
__d_a_v_i_d__ Posted May 26, 2012 Author Report Share Posted May 26, 2012 depending on how you want to cal the displacement but with your box dimension this would be smallest idd build it to, if you wanted slot you could have a lower tune, my opinion is 32/33flat suit this sub, but that my opinion you have the cone area of close to 2x18 and the power of 3-4 of them, i some how dont thing 3/4 will cut it, Ive even be tempted to go 1.5" but seen as its a temp box 1" should do i have the cone area of 2 15s actually.. and bracing is key, though most likly will double the sub side. and can you make me a 30-33 hz box using the 2 6" ? you can cut the 20" length if need me... also the width is 26" and depth 36" Quote Chevy Impala Shocker Sigs / TC Sounds 12s Sundown NS-1 | SAX 100.4 Sundown Neos | Dayton Audio Neos ETCCC ETCCC ETCCC My YouTube ---- Subcribe!! Link to comment Share on other sites More sharing options...
CaPRiCEx383 Posted May 26, 2012 Report Share Posted May 26, 2012 Dude! Where you gonna put the aeros with 12" box height and 8 8's? Quote 90 Nissan 240sx Avic z-140bh Audison SR4 Audison Voce 6.5s CDT es-20 tweeters Sundown 1500v3 (2) DD 9510's 3 cube box 2 6" aeros XS Power D2400 & Xp950 Skyhigh/Knukonceptz/Rockford Fosgate wiring More Coming Soon.. Check my builds below. 97 Civic Hatch Build 86 Caprice Build you can pick up a chick in a car... I think it'd be hard to roll up mackin on a broad sittin on a sundown. My opinion Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.