SnowDrifter Posted March 18, 2013 Author Report Posted March 18, 2013 Got the location of the tweeters laid out to where I want them. Depending on how the weather is tomorrow, I may or may not be doing them. I'm not fiber-glassing in the rain lol This looks good The best "pre drill" I could come up with since the windshield is in the way lol Glued and screwed in place. How I plan on using them, the magnets should have a pull force of 20lbs. Should hold the tweets in place nicely ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
Carbon Posted March 18, 2013 Report Posted March 18, 2013 Fuck yeah dude! That looks great! Will those neo magnets interfere with the tweets in any way?
SnowDrifter Posted March 18, 2013 Author Report Posted March 18, 2013 Nope. Already checked. The pull force on the tweeter is there, but it's very minuscule and I'm not convinced it will make a difference. I'm pretty sure they are magnetically shielded too or something - nothing ferrous will stick to the tweeter. IF I have an issue, I'll deal with that when I come do it lol ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
BassMunky Posted March 21, 2013 Report Posted March 21, 2013 what you gonna glass them too? the a pillar or the dash? Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
CNF Kevosinn Posted March 21, 2013 Report Posted March 21, 2013 hell ya looks good *** SuperSeller Status Verified *** ( http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers/ ) "kevosinn's" astro van 8 custom Sundown Zv4 18's 4 Sundown scv 6000's CNF Distribution CNC parts Skyhigh wire some batteries SMD Meters and tools used on the installhttp://www.stevemeadedesigns.com/board/topic/172877-kevosinns-vanwest-coast-skyhigh-car-audio-vehicle/ 16,000 watt walled silverado build.http://www.stevemeadedesigns.com/board/topic/161965-walled-silverado-4-hdc4-15s-4-crescendo-3500s-and-much-more/ 8,000 watt 1999 Subaru legacy outback. Build log here: http://www.stevemead...ru/page__st__60TEAM CNF Distribution
SnowDrifter Posted March 21, 2013 Author Report Posted March 21, 2013 what you gonna glass them too? the a pillar or the dash? Going to make some standalone pods. Can't take off my a-pillars without breaking them because of this dumb clip design hell ya looks good Thanks man! ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
SnowDrifter Posted March 21, 2013 Author Report Posted March 21, 2013 I keep waiting for a break in the weather, but there just hasn't been one ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
CNF Kevosinn Posted March 21, 2013 Report Posted March 21, 2013 I use a heater to keep my garage warm when I glass and its cold out. I lay the glass down outside then heat my garage up and let it dry in there over night *** SuperSeller Status Verified *** ( http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers/ ) "kevosinn's" astro van 8 custom Sundown Zv4 18's 4 Sundown scv 6000's CNF Distribution CNC parts Skyhigh wire some batteries SMD Meters and tools used on the installhttp://www.stevemeadedesigns.com/board/topic/172877-kevosinns-vanwest-coast-skyhigh-car-audio-vehicle/ 16,000 watt walled silverado build.http://www.stevemeadedesigns.com/board/topic/161965-walled-silverado-4-hdc4-15s-4-crescendo-3500s-and-much-more/ 8,000 watt 1999 Subaru legacy outback. Build log here: http://www.stevemead...ru/page__st__60TEAM CNF Distribution
COLTON94 Posted March 21, 2013 Report Posted March 21, 2013 I was guna use knu for wire. But even skyhighs bad batch is thick as hell. Strand count is pretty high up there. Only reason john didnt know for sure was cause this batch was a bit off. I used to think wire was wire but i can honstly say my door speakers sound better after swaping out my same guage walmart wire for his stuff. Its nice and thick and still easy to work with
BFF Larry Posted March 21, 2013 Report Posted March 21, 2013 nice compromise man! Team Clearly Louder (MECA)Team DC Audio ++* SELLING the CACTUS SOUNDS K12 for $1550 shipped *++ HMU!!! 3 flips. nollie flips. big flips. hardflips. - steez Youtube Channel My Build Log 95 Bonneville SSE - WALLED/4th Order - ~30 cubes - *thanks LoganBerry, CortezDVT, Cj18, SuperCharged DC, Ryan-RAM Designs,LoudNLow931*
Recommended Posts
Archived
This topic is now archived and is closed to further replies.