As-21 Posted July 4, 2012 Report Share Posted July 4, 2012 I know there is no level 5 yet but i am tired waiting for any specs and news so i started my way to design the enclosure for it. If the specs wont change much i got one ready here is picture of the box and specs from Torres. I will be glad to hear your opinions about it. Quote Hertz HSK 165XL Celestra FA475xDC Audio 3.5KDC Audio level 5 12 inchXS Power 6500 on the front.XS Power 3100 on the back.Knukonceptz 0 gauge an 10 gauge OFC wire. Link to comment Share on other sites More sharing options...
donpablo Posted July 4, 2012 Report Share Posted July 4, 2012 I belive net vol should be around 2-2.25 Quote 2015 F-150 Platnuim Link to comment Share on other sites More sharing options...
OrionStang Posted July 4, 2012 Report Share Posted July 4, 2012 Might want to try less height so you can do a wider port. A little more net volume too, closer to 2 cu ft. Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
As-21 Posted July 4, 2012 Author Report Share Posted July 4, 2012 Is this better ? Quote Hertz HSK 165XL Celestra FA475xDC Audio 3.5KDC Audio level 5 12 inchXS Power 6500 on the front.XS Power 3100 on the back.Knukonceptz 0 gauge an 10 gauge OFC wire. Link to comment Share on other sites More sharing options...
OrionStang Posted July 4, 2012 Report Share Posted July 4, 2012 Put a 1 in the box for extra baffles. Other than that, looks good. Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
P4killer_ Posted July 4, 2012 Report Share Posted July 4, 2012 Well it looks like you net vol at 1.6 is a tad small and also 13sq in of port is kinda low for slot ports also. I mean you will be running quite a bit of power.. so 1.6 net should help with cone control and help to avoid damaging anything mechanically but I'd def run more port say 15-16 sq inches. With clean power and don't play too much below tuning and at 32 Hz you shouldn't need to play to far below that. I think you'd be ok. Quote Setup: 2010 Hyundai Elantra Factory Unit via 4 chan NVX LOC Excessive Amperage "H/O" Alt Xs D3400/ Xs XP3000 Big 3. 2 Runs of +, 2 Runs of - DD M3b and 2 12" AQ HDC4s Link to comment Share on other sites More sharing options...
As-21 Posted July 4, 2012 Author Report Share Posted July 4, 2012 (edited) here is new one with extra baffle. what you think ? Edited July 4, 2012 by As-21 Quote Hertz HSK 165XL Celestra FA475xDC Audio 3.5KDC Audio level 5 12 inchXS Power 6500 on the front.XS Power 3100 on the back.Knukonceptz 0 gauge an 10 gauge OFC wire. Link to comment Share on other sites More sharing options...
OrionStang Posted July 4, 2012 Report Share Posted July 4, 2012 What are your available dimensions? It looks ok, but could use more port. Im doing an 11.5x4 port for my Mayhem 12. Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
98GCLimited Posted July 4, 2012 Report Share Posted July 4, 2012 Id go 2.5 or 3 wide on that port if you can fit it and keep 2 cubes net volume. Quote Link to comment Share on other sites More sharing options...
CJ18 Posted July 4, 2012 Report Share Posted July 4, 2012 (edited) 1.75-2ft3 Edited July 4, 2012 by CJ18 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.