CleanSierra Posted July 26, 2012 Report Share Posted July 26, 2012 You should have built a simple ported box, and not a quasi 6th order. It looks like the sub will be firing at a loading wall. Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
siucsaluki11 Posted July 26, 2012 Report Share Posted July 26, 2012 lets see some pics, cuz his second post sounds like its just a loading wall EDIT: Saw pics, looks like a failed bandpass....that is just awful...i hope you get your money back.... woman..cant live with em...cant shoot em...guess were all fucked You might be a Redneck if you use your leftover gutters for a speaker box port... YOU JUST LOST THE GAMER.I.P. Blazer=========================Last setup was in the 141s on music (37hz) with 2 12s and 1kw in a 4dr blazer.2010 Mitsubishi Lancer DE2 12in Clarions (kept from blazer)HiFonics BRZ1700.1d (at 2 ohms BLOWN) [JBL GTS180X for subs currently 60wRMS x2ch!!!!!! This works for till i get the blown amp fixed] Alpine 4ch salvaged from blazer (currently near death)9887 peerless 7s in the doors and CDT tweeters ran active no speakers in the rearKintik HC1400 under the hood.metered once a while ago, dont remember it...was piss poor compared to the blazer, mid 130s i think....looking to replace subs and amp when i have money. Link to comment Share on other sites More sharing options...
ncc74656 Posted July 26, 2012 Author Report Share Posted July 26, 2012 i posted all the pics i had on the previous page. the intent was to have the sub litteraly encased in wood, front, back and sides. the box would have vents in front and behind itself. this was done to mimic a down firing sub and give it something to fire against instead of a cloth back seat. currently it is my understanding the box is being rebuilt outside of mfg spec in an attempt to make it hit a wider range of frequencies. the box may end up being a slot port in the end. nothing, gutted Link to comment Share on other sites More sharing options...
Bmike Posted July 26, 2012 Report Share Posted July 26, 2012 looks like you got close to 9 cubic feet, and only 50 cubic inches of port, i would say its way to little port. and with out a picture of the final box its going to be hard to guess what you got going on there. 2007 trailblazer lthead unit- pioneer p4300dvd crescendo ft-1 supertweeters pioneer m650 pros audiocontrol 2xs crossover Rockford fosgate p200-2 highsrockford fosgate p400-2 mids1- fi btl 18amps- saz 3500battery- evermax in front, 2 9a31 dekas in rearwires all knuconceptz 1/0 and rcas Link to comment Share on other sites More sharing options...
n8ball2013 Posted July 26, 2012 Report Share Posted July 26, 2012 You say its a custom sub there are no specs if that's the case. Your builder is a hack THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
ncc74656 Posted July 26, 2012 Author Report Share Posted July 26, 2012 its a fi audio BL direct from FI audio. so the specs from there website is what he would be going by. thank you BM mike for some input, i will see if i can get a pic of the sub in box nothing, gutted Link to comment Share on other sites More sharing options...
Mr.JaunDurfle Posted July 26, 2012 Report Share Posted July 26, 2012 So the box is "custom" not the sub? 2001 VW Passat Sportwagen Alpine ICS-X7HD DC Audio 5K SSA 15" XCON Tantric Sounds 6.5HD's, Sundound Audio SA-6.5CS Incriminator Audio IA6.4 XS batteries, KnuKonceptz wirez, Second Skin Link to comment Share on other sites More sharing options...
CleanSierra Posted July 26, 2012 Report Share Posted July 26, 2012 I'm abandoning this thread. I'm not sure what the OP is even looking for. If you trust your builder, fantastic. What kind of advice are you interested in getting here? It doesn't seem like the knowledge of this forum will be put to use. Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
ncc74656 Posted July 26, 2012 Author Report Share Posted July 26, 2012 clean sierra i am looking for what boxes (with specs) others have used for there fi bl's. i thought i made that clear in the first post. the box is obviously custom, the sub is as custom as fi comes what with there optional extras and such. nothing, gutted Link to comment Share on other sites More sharing options...
n8ball2013 Posted July 26, 2012 Report Share Posted July 26, 2012 If he can't build a simple ported box he's a hack. I've seen a lot of shit in my day but never what he's trying to do nor the logic behind it THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.