SnowDrifter Posted October 31, 2012 Report Posted October 31, 2012 I have a crescendo pwx 6.5 and the little push terminals that come with it stick out farther than the cutout of the driver. ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
memphisBred Posted October 31, 2012 Report Posted October 31, 2012 Invert SMD Super Seller/Buyer Audison----Hertz----Rainbow
SnowDrifter Posted October 31, 2012 Author Report Posted October 31, 2012 Lol ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
SoCaLBaMF Posted October 31, 2012 Report Posted October 31, 2012 Just tilt it to put the terminal in first 2004 Bagged Trailblazer (4)18" Sundown Nsv3s (4) Taramps HD10000s, Taramps DSP3000, Lanzar opti 250x2, AB 100x4 (2)DC power SP 270s, (14)XS Power d3100s, (1)d6500
Noel989 Posted October 31, 2012 Report Posted October 31, 2012 Wtf!? Can you push it inwards? Build Log - http://www.stevemead...-cruiser-el-pt/
memphisBred Posted October 31, 2012 Report Posted October 31, 2012 Any way they can be pushed downwards or pushed in while mounting them? SMD Super Seller/Buyer Audison----Hertz----Rainbow
reg93f150 Posted October 31, 2012 Report Posted October 31, 2012 hm, do you think you could push them in and then put the speakers in there? probably not.. but damn that sucks lol hopefully when i order mine they aren't like that.. ALL CREDIT TO XX1 FOR DC BANNER down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups strapping 2 amps together ? like bolting them next together? using bungy cables to hold them down? or wiring separate amps to each sub
TRTC360 Posted October 31, 2012 Report Posted October 31, 2012 Just tilt it to put the terminal in first x2 '93 Firebird Formula V8 H/U- Kenwood eXcelon KDC-X395 Mids/Highs Amp- Hifonics ZXI80.4 Wiring-KNU RCA's, Speaker Wire, And Two Runs Of Trystar 1/0 G34 Red Top and a 180amp Ford Alternator www.youtube.com/TRTC360
iSlap Posted October 31, 2012 Report Posted October 31, 2012 Put it in at a angle (thats what she said) REPPIN 405 SQAUDD you can hear me for ya see me My setup (special thanks to DC creations) 1 Soundstream rub 2500 with 1/0 gauge 1 DD 9518g Pioneer DEH-P6000UB Stock alternator (170 amp) Dura last gold under hood with big 3
memphisBred Posted October 31, 2012 Report Posted October 31, 2012 Just tilt it to put the terminal in first The magnet will likely hit the edge of the baffle opposite the terminals. SMD Super Seller/Buyer Audison----Hertz----Rainbow
Recommended Posts
Archived
This topic is now archived and is closed to further replies.