Hey raptorman and corona jeff, last time I promise

[donberto]

Dc level 2 12. Torres dimensions are 18 3/8 H, 16 1/2 W, 12 9/16 D. Port 15 in H, 1 in. W, 25in long. Physical port length 23.25. 3 common port walls .14 displacement for sub. 1.62 gross. 1.25 net at a tuning frequency of 33.56. Will start rebuild tomorrow, just wanted a higher caliber checker. Port area is 15.00 in sq. port volume .23ft cu. port area Per cube 12.00 in sq. Let me know if i need to change thanks, seems to meet perameters

[Raptorman]

Make the port area per cube at least 14. You want to shoot for 14-16. Other than that, it all seems good.

[donberto]

how can i do that. I tweak the heigth and port width to 1.1 or 1.2 but throws internal net and gross and tuning out when i do this. and length and it stays at 12.00 in sq. Everything seems to be to spec

[SnowDrifter]

If making a bigger port throws off your net volume, make the box bigger to compensate

[donberto]

Sorry for being retarded. New dimensions are 19.5 Hx 16.5 Wx 12.56D. Port 15inHx1.2Wx 31in L. sub dis .14 for a gross of 1.73 net of 1.25. Port area per cube of 14.40 tuned to 33.24

[corona_jeff]

You might have to consider doing a sealed application

[ALPINE408]

lmao raptor man high calibur thanks

[donberto]

the above specs work 1.25 net, 1.73 gross tuned to 33.24, port area per cube 14.40. And this will work in the limited space I have. Port width 15in 1.2 wide and 31 long. Just don't want sealed but last resort if need be.

[corona_jeff]

Those specs will work. As long as what you posted is correct

[Raptorman]

Lol I don't think I'm of any sort of high calibur, haha. But that seems good. Sorry I was AFK.